Page 1
Air purifier QXPure3 Instruction manual (English) Dear customer, thank you for choosing our air purifier. To help you install and use the product, we recommend that you read this manual carefully and keep it in a safe place. We want to make sure that you always enjoy fresh air.
Performance Product name Air purifier (Anti-Virus) Rated voltage 220V – 240V Rated frequency 50Hz/60Hz Rated power Noise (max.) 57 dB(A) Particulates CADR 215m³/h Particulates CCM Energy efficiency index High (depending on power level and condition of the filter) Cleaning rate 200m³/h Formaldehydes (CADR) Formaldehydes cleaning...
Features Filter functions Purification of pollutants such as smoke, formaldehyde, aldehydes, ketones, isothiazolones, acrylates, epoxides, other volatile organic compounds (VOC), etc. Filtering of inhalation allergens, the so called aerogenic allergens, filtering of pollen, mold spores, dust, allergenic animal hair and eptiles.
Product Structure with operation and display elements Air outlet Operation panel Sensor Handle Air quality indicator WiFi Filter Power Air speed Child safety lock Timer + reminder Displays air quality level Sleep mode...
Filter installation 1. Remove plastic bag a. Remove the front cover, press lightly on the top left and right corners of the cover and then fold the cover away. b. Remove the pre-filter c. Before using, remove the filter from the plastic packaging. The function of the device is only then possible.
How to use 1. Switch on the device Switch on the device with the "Power" key. The display initially remains red. After switching on, the air quality is measured for approx. 1 minute via the air quality sensor. After that, the device goes into AUTO mode and the display switches to green.
Page 8
You can lock the operation of the air purifier by simply pressing the child lock key. This is also recommended in rooms with many people, for example, to prevent accidental adjustment of the operation. The Child safety display remains active and the unit continues to operate in the set lock mode.
Page 9
Useful tips for using the air purifier Basically, we recommend the use of the automatic mode. In this mode, the optimum mode for achieving and maintaining the best air quality is selected via our intelligent sensor evaluation (Intellisense). The motor speed of the fan is controlled via the data of the PM2.5 sensor.
Requirements for the placement 1. Ensure that the device is not placed in direct sunlight, opposite air conditioning vents or in heated locations. This may cause the device to warp, discolor or malfunction. Do not place the device near TVs or radios. This may cause picture interference or noise.
Safety instructions 1. The machine is prohibited from moving or shaking while it is running. Do not pull on the power cord while moving or storing it. Pulling the power cord may cause a short circuit or damage to the inside of the power cord, resulting in fire or electric shock. 2.
Page 12
8. Do not use the device near gas appliances, heaters, fan heaters or ovens. If the air is too warm that will damage the filters and in extreme cases this may cause permanent damage to the device. 9. Do not use this product in a wet or hot environment such as a bathroom, toilet or kitchen.
Page 13
Other notes to keep in mind: 1. If any of the following problems occur, the device must be disconnected from the power supply immediately: Unusual noise or vibration during operation. Air purifier is unusually hot or has a burnt odor. ...
Maintenance 1. Equipment care The suction and discharge areas should be checked regularly. We recommend cleaning these areas with a brush attachment of your vacuum cleaner. Please do not use any chemical cleaning products for cleaning the housing parts. 2. Pre-filter (about twice a month) Clean the surface of the filter with your vacuum cleaner or wash it with water.
Troubleshooting Malfunction Inspection/Solution Can't turn on or press Check that the device plug is Button. No response. plugged in and that the power outlet is supplied with main power. The air is polluted; the indicator Make sure that the air purifier is does not light red.
WiFi instructions - QXPure 3 (How to install and using the App) 1. Scan and Download Scan QR-Code and download „Smart Life“-App. Register and Login to APP. 2. Add Device: „Small Home-Appliance“ 3. Select “ Air-Purifier (Wi-Fi)“ 4. Select WIFI-Network (2.4GHz, not 5GHz) ****** 5.
Need help?
Do you have a question about the QXPure3 and is the answer not in the manual?
Questions and answers