Related Manuals for Auto Test WorkshopPro 10
Summary of Contents for Auto Test WorkshopPro 10
- Page 1 User Manual AutoTest ® WorkshopPro ® 10” PREMIUM TABLET BASED DECELEROMETER / BRAKE TESTER AND WORKSHOP TOOL, WITH BLUETOOTH PRINTER...
- Page 2 DECLARATION OF CONFORMITY We, AutoTest Products Pty Ltd. declare under our sole responsibility that the product AutoTest Workshop Pro 10 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity is available from http://www.autotest.net.au ©...
-
Page 3: Table Of Contents
Table of Contents AutoTest Workshop Pro 10 PREFACE ........................2 FOR YOUR SAFETY..................... 2 WARRANTY ....................... 3 Autorised Service Agents..................4 UNPACKING AND FIRST TIME USE................4 First time Activating your Workshop Pro ............4 4.1.1 Buying a license ......................7 OPERATION ....................... -
Page 4: Preface
1. PREFACE Thank you for purchasing AutoTest products. Please read this manual completely before installing and operating the product so as to ensure correct operation of the product. Make certain that this manual can be accessed whenever necessary. 2. FOR YOUR SAFETY Read these simple guidelines. -
Page 5: Warranty
3. WARRANTY When you purchase an AutoTest Product you are required to complete warranty registra- tion form, and return to AutoTest Products Pty Ltd within 10 days of purchase of the product. AutoTest Products or any Authorised AutoTest Service Centre warrants this product against de- fects in material and workmanship for a period of 12 months from the original date of purchase. -
Page 6: Unpacking And First Time Use
4. UNPACKING AND FIRST TIME USE Congratulations on your choice of an AutoTest Workshop Pro. Please take the time to read this User’s Manual before using the AutoTest Workshop Pro in the field. Incorrect or inappropriate use of this instrument may void the warranty. Retain the packing materials for future shipping and transport of the unit. - Page 7 Figure 2 NOTE: if instead you see a prompt to Enable Location you need to go to your Location Settings and enable Location settings for the app by selecting the “Location Settings” (Figure 3) button and enable the slider in the top right of the Location screen (Figure 4). Figure 3 Figure 4 If prompted to improve location accuracy you should agree if you intend to connect your tablet...
- Page 8 Figure 7 Figure 6 Step 6 : Press “Check Connection” to verify your serial number (Figure 8). If verified, press “Yes.” (Figure 9). If the serial number doesn’t match, please contact Autotest Products. Figure 8 Figure 9 Step 7 : Press “Activate” to apply the provided 12-month license of Brake Pro (Figure 10). Ensure you restart the Brake Pro app after activating the license (Figure 11).
-
Page 9: Buying A License
Step 8 : The screen will display initial verification checks for Wi-Fi connection, location, and serial number. Once verified, press “START.” (Figure 12) Figure 12 Step 9: Warranty Registration: Enter the required details for warranty registration (Figure 13). Note: Please provide a valid email address for registration submission and input the code sent to the provided email address for verification (Figure 14). - Page 10 Step 2: Enter your Personal Details and Press Next. (Figure 16) Figure 16 Step 3: Choose the License (AutoBrake Pro). It will display the price of the License = $120 for 12 Months. (Figure 17) Figure 17 Step 4: Enter your credit card details and complete the payment. (Figure 18) Once the purchase is successfully processed and accepted, a prompt will appear to confirm that your Brake Pro License is now successfully activated.(Figure 19) Figure 18...
-
Page 11: Operation
5. OPERATION Before you begin testing you should calibrate your Workshop Pro, the reason for this is to maintain creditability in tests. Provided you have an active license you will be able to calibrate at any time by going into the Settings menu and selecting the Calibration option. You will be prompted with instructions on screen to perform the calibration. -
Page 12: Running A Test
Bad Positioning: • Uneven Surfaces : Avoid placing the brake tester on irregular surfaces such as under seats, near foot areas, on the dashboard, or on one’s lap, as this can produce inaccurate readings. • Loose Mounting: If the tester is not properly secured, it can move during testing, affecting the accuracy. -
Page 13: Reviewing A Test
Test Process : Step Test Status App Action User Action User hits “START” after providing the examiner id Make sure the tablet Test window begins counting and registration number of completely secure/stable and down from 5 the vehicle and customer don’t bump it name Test setup countdown... -
Page 14: Printing A Test
In order to cycle through the 3 different measurements for Average / Peak deceleration you need to touch the test screen where the report says ‘Average Deceleration’ or ‘Peak Deceleration’ (Figure 26) and select the corresponding measurement unit (Figure 27). Figure 26 Figure 27 5.5 Printing a Test... -
Page 15: Database
6. DATABASE To review a test you have previously conducted you need to access the “DATABASE” option of the main menu (Figure 31), all the tests that have been conducted will be added to the subsequent list on the Database window ( Figure 32). The registration will be the first section of each record, followed by the time the test was conducted. -
Page 16: Calibration
Figure 34 7.1 Calibration The Workshop Pro requires initial calibration and periodic re-calibration to adhere to brake testing regulations. Annual calibration is necessary to ensure compliance and accuracy in tests, aligning with international standards and maintaining credibility. Periodic calibration should occur every 12 months. - Page 17 Return to the settings Screen prompts menu and confirm the “Calibration saved” date calibrated un- towards the bottom derneath Calibration of the screen button NB. If a tracible calibration is required, this can be obtained by sending your devices to the nearest Authorised Service Centre.
-
Page 18: Bluetooth
7.2 Bluetooth The Bluetooth page (Figure 35) will manage which devices are currently connected to the Workshop Pro. When using the unit with a Bluetooth printer you will have to navigate to this page in order to pair the two devices. (Figure 36) The “Paired Devices”... - Page 19 Figure 38 Figure 39 Figure 40 Figure 41 In the event you need to unpair a printer from the Workshop Pro simply press and hold the entry on the “Paired Devices” and select “Unpair” from the prompt. A Bluetooth device can alternatively be paired from the tablet’s Bluetooth settings. To pair a device using the systems Bluetooth settings follow the steps below: 1.
-
Page 20: Pedal Effort Sensor Activation
Click “Pair New Device” (Figure 43) Wait for available devices to be found (be sure the device you are trying to pair with is on and ready to pair) (Figure 44) Press a device to pair with it (and enter a code if required: check with the device manual for the specific code). -
Page 21: Check For Updates
Figure 49 Figure 48 6. Finally, confirm the entered and paired serial numbers match and click Activate Device. (Figure50) Figure 50 7.5 Check for Updates The “Check for Updates” entry in the settings page allows you to toggle whether or not the Workshop Pro will prompt you for any available software updates (Figure 51). -
Page 22: Return Of Workshop Pro
8.1 Packaging The Workshop Pro should be packaged in the original shipping container. However, where this container is not available, remember that you are shipping an electronic instrument. Bubble pack or foam should surround the Workshop Pro and should be inserted into a sturdy cardboard box. 8.2 Shipping Labelling - A label noting “Electronic Device - Fragile”... - Page 23 NOTES: Copyright 2024 AutoTest Products Pty Ltd ABN 47 005 712 005. ® denotes a trademark owned by AutoTest Products Pty Ltd ABN 47 005 712 005. AUTOTEST Products Pty Ltd 69 Parsons St Kensington VIC 3031 Australia Phone: (+61 3) 8840 3000 Service: (+61 3) 8840 3016 service@autotest.net.au Sales:(+61 3) 8840 3017...
Need help?
Do you have a question about the WorkshopPro 10 and is the answer not in the manual?
Questions and answers