Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for EUROPE PROJECTION HYDROFUT 1200
- Page 1 Réf. 30895 EUROPE PROJECTION - 228, avenue Olivier Perroy 13790 ROUSSET - Tél : +33 (0)4 42 29 08 96 SAS au capital de 400 000 € - RCS Aix-en-Provence B 394 961 510 - NAF 2892 Z - Intracom : FR 54 394 961 510 Edition of 04/06/2024 More information on www.euromair.com...
-
Page 2: Table Of Contents
4.6. Spraying technique ............p.15 4.7. Unclogging the tip ............p.17 4.8. Stopping work ..............p.17 5. MAINTENANCE ..............p.18 5.1. Cleaning procedure ............p.18 5.2. Defects and remedies ..........p.19 6. DECLARATION OF CONFORMITY ........ p.21 7. WARRANTY CONDITIONS ..........p.22 User manual - HYDROFUT 1200 202406-695-ENG... -
Page 3: User Manual
- people in charge of the transport of the machine - people in charge of the use of the machine - people in charge of the cleaning and maintenance of the machine - people in charge of the final destruction of the machine 202406-695-ENG User manual - HYDROFUT 1200... -
Page 4: Warning
In case of needed After-Sale Service, always specify the machine model and its serial number. • For any replacement of parts, only use genuine parts. • Do not modify the machine. • Do not cut or dismantle the protection grids. User manual - HYDROFUT 1200 202406-695-ENG... - Page 5 Never start the machine in an enclosed area, the exhaust gases from the engine contain carbon monoxide, which is invisible and odourless and represents a mortal danger. IN CASE OF NECESSITY, WE SAVE OURSELVES THE RIGHT TO MAKE ANY USEFUL MODIFICATION WITHOUT ADVANCED NOTICE. 202406-695-ENG User manual - HYDROFUT 1200...
-
Page 6: End-Of-Life Of The Product
For any further information, please contact our hotline to conseil@euromair.com or +33 4 42 29 08 96. User manual - HYDROFUT 1200 202406-695-ENG... -
Page 7: Your Machine
3. YOUR MACHINE 3.1. DESCRIPTION HYDROFUT 1200 is configured for interior and exterior large painting jobs. It offers a continuous product flow-rate for a uniform coating and a regular atomization. It draws the paint directly from paint barrels. Compact and equipped with a removable pump, it can take place in the back of a truck with barrels or bags. -
Page 8: Identification Of The Components
Product suction pump Pump stop valve Manometer Product filter Drain valve Drain hose Product pressure adjustment knob Hydraulic oil filling cap Oil filter Control panel (see next page) Motor (see next page) Hose reel Stabilising stand User manual - HYDROFUT 1200 202406-695-ENG... - Page 9 3.3. IDENTIFICATION OF THE COMPONENTS (continued) Handle for pump or reel selection Handle for reel rotation direction selection Reel speed adjustment knob Motor accelerator Starter Fuel valve Launcher Fuel tank Motor oil filling and level plug Motor ignition switch 202406-695-ENG User manual - HYDROFUT 1200...
- Page 10 3. YOUR MACHINE (continued) 3.3. IDENTIFICATION OF THE COMPONENTS (continued) Trigger Trigger locking pin Product intlet connector Trigger protection Tip support Tip gasket Tip seat User manual - HYDROFUT 1200 202406-695-ENG...
-
Page 11: Use Of The Machine
If a product containing silica is used, ensure that glass or ceramic surfaces that could be damaged by such a product are properly masked. Avoid using masking tape that is too strong on sensitive areas (wallpaper, painted surfaces) to avoid damaging them when the tape is removed. 202406-695-ENG User manual - HYDROFUT 1200... -
Page 12: Preparing The Machine
Switch off the machine (knob (Q7) in position 0, fuel tap (Q3) closed). Open valve (E). Unlock the trigger, place the gun over an empty container, then press the trigger to release the pressure. When all the pressure has been released, lock the trigger again. User manual - HYDROFUT 1200 202406-695-ENG... - Page 13 The values given in the table above are for guidance only. Dilution must comply with the recommendations on the product packaging and can be adjusted by carrying out spray tests (see Spraying technique section). 202406-695-ENG User manual - HYDROFUT 1200...
-
Page 14: Starting Up
25. Return the handle (N) up and start spraying. Never run the pump without water or product at the risk of damage. To stop the motor, set the switch (Q7) to the OFF position and turn off the fuel supply (Q3). User manual - HYDROFUT 1200 202406-695-ENG... -
Page 15: Spraying Technique
: • Increase the pressure gradually. • Dilute the product further (in 5% increments, without ever exceeding the dilution limit recommended by the product manufacturer). • Reduce the tip size. 202406-695-ENG User manual - HYDROFUT 1200... - Page 16 Move your whole arm, not just your wrist, to limit irregularities. • The spray gun should be perpendicular to the surface to be painted to avoid differences in the thickness of the paint layer. User manual - HYDROFUT 1200 202406-695-ENG...
-
Page 17: Unclogging The Tip
Place the gun in a plastic bag and seal the bag. • Use a little water to lightly dampen the surface of the paint in the bucket. This prevents a layer of dried paint forming. 202406-695-ENG User manual - HYDROFUT 1200... -
Page 18: Maintenance
When the water comes out clean from the drain hose (F), close the valve (E) and make sure that no more water flows out of the drain hose. 10. Wait for the water to come out clean from the gun, increase the pressure if necessary. User manual - HYDROFUT 1200 202406-695-ENG... -
Page 19: Defects And Remedies
In case of an unknown defect or a doubt on the good running of the machine, do not try to repair it by yourself or to dismantle it. Contact an authorized After-Sale Service or our hotline : +33 4 42 29 08 96. 202406-695-ENG User manual - HYDROFUT 1200... - Page 20 User manual - HYDROFUT 1200 202406-695-ENG...
-
Page 21: Declaration Of Conformity
Patrick BOREL President EUROPE PROJECTION - 228, avenue Olivier Perroy 13790 ROUSSET Tél : +33 (0)4 42 29 08 96 - www.euromair.com SAS au capital de 400 000 € - RCS Aix-en-Provence B 394 961 510 - NAF 2892 Z - Intracom : FR 54 394 961 510... -
Page 22: Warranty Conditions
We exclude all liability for indirect damages suffered by the customer, such as, but not limited to, loss of income, turnover, loss of profits, loss of image, of any kind whatever. User manual - HYDROFUT 1200 202406-695-ENG... - Page 23 As this principle also applies to batteries, our supplier Parts Holding Europe, or one of its sister companies, remains your contact for your requests (https://www.partsholdingeurope.com/). 202406-695-ENG User manual - HYDROFUT 1200...
- Page 24 EUROPE PROJECTION - 228, avenue Olivier Perroy 13790 ROUSSET - Tél : +33 (0)4 42 29 08 96 SAS au capital de 400 000 € - RCS Aix-en-Provence B 394 961 510 - NAF 2892 Z - Intracom : FR 54 394 961 510 More information on www.euromair.com...
Need help?
Do you have a question about the HYDROFUT 1200 and is the answer not in the manual?
Questions and answers