Related Manuals for ZeroKey QTM-DMC10
Summary of Contents for ZeroKey QTM-DMC10
- Page 1 QTM-DMC10 Device Manual QTM-DMC10 Device Manual v1.0.5 Quantum RTLS Dot Compact Mobile Node 2022-11-07...
- Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification, or alteration is authorized in writing by ZeroKey; or (2) the serial number of the product is defaced or missing.
- Page 3 • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this product not authorized by Zerokey could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product. This equipment can be installed and operated with a minimum distance 5 millimeters between the radiator and user’s body.
- Page 4 QTM-DMC10 Device Manual If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •...
- Page 5 QTM-DMC10 Device Manual ISED Regulatory Statement Model: QTM-DMC10, IC: 26679-QTMDMC10 CAN ICES-003(B)/NMB-003(B) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference.
-
Page 6: Table Of Contents
QTM-DMC10 Device Manual CONTENTS PREFACE ................................7 ................................. 7 BOUT THIS GUIDE ..........................7 HERE TO FIND MORE INFORMATION ............................ 7 ONVENTIONS USED IN THIS GUIDE ................................. 7 YPOGRAPHY PRODUCT OVERVIEW ............................ 8 ....................................8 ..........................8 PHYSICAL CHARACTERISTICS 2.2.1 Size ................................ -
Page 7: Preface
QTM-DMC10 Device Manual PREFACE ABOUT THIS GUIDE This guide contains the information you will need to operate a QTM-DMC10 with the Quantum RTLS system. WHERE TO FIND MORE INFORMATION Refer to the following sources for additional information and for product and software updates. -
Page 8: Product Overview
A Mobile node is a tracking reference and should be attached to the person or object of interest in the tracking system. The QTM-DMC10 is an ultra-compact, rugged node intended for long- term use in applications that involve extended periods of time with little to no movement. -
Page 9: Alerts, Warning And Indicators
• Battery level for the unit can be viewed when the unit is connected to the network, through the Network tab in the ZeroKey Config Tool. • Battery life is dependent on system usage and how frequently the unit is in motion. -
Page 10: Certification Marks
QTM-DMC10 Device Manual 2.4 CERTIFICATION MARKS The QTM-DMC10 is a small device where it is impractical to label the certification marks in a legible manner. As such, the certification markings are included in this manual as shown below. 2022-11-07... -
Page 11: Installation
• Insert the CR2032 battery positive (+) side up. CAUTION: Use only CR2032 to prevent damage to your ZeroKey Device. • Replace the battery cover by pushing down slightly and turning the cover clockwise about 45 degrees until it locks in place. -
Page 12: Mounting The Qtm-Dmc10
QTM-DMC10 Device Manual 3.2 MOUNTING THE QTM-DMC10 3.2.1 I NCLUDED OUNT Installing Dot in universal mount: • Line up any one of the eight grooves around the perimeter of the device with OPEN text embossed on the dot mount •... -
Page 13: Attaching The Mount
QTM-DMC10 Device Manual 3.2.2 A TTACHING THE OUNT The DOT universal mount provides multiple methods for attaching it to the item to be tracked. Hole for countersunk M4 or #8 screw Passthrough for 6mm cable tie 3.2.3 L ANYARD To use the included wrist lanyard: •... -
Page 14: Connecting
Once power has been supplied to the system, refer to section 2.3.1 to verify that all devices are on and on and have entered idle state. Before affixing the QTM-DMC10, ensure that the device is detected by the ZeroKey Spatial Intelligence platform. -
Page 15: Operation
QTM-DMC10 Device Manual OPERATION The QTM-DMC10 is a Quantum RTLS Mobile node. In Quantum RTLS, the mobile node is a tracking reference and should be attached to the person or object of interest in the tracking system. In regular operation the user attaches the mobile node to their clothing, equipment or asset in an outward-facing manner. -
Page 16: Product Care
QTM-DMC10 Device Manual PRODUCT CARE 5.1 GENERAL CARE 5.1.1 C LEANING The device can be cleaned using a moistened soft cloth and nonabrasive hand/dish soap. DO NOT IMMERSE. Wipe dry to prevent any moisture build up. 5.1.2 O PERATING EMPERATURE This device is designed to operate from -20°C to +60°C ambient. -
Page 17: Repairs And Disposal
6.2 OPERATION LOGS The QTM-DMC10 updates and maintains information concerning its operation and activities as it is being used around the site. This information is used to the monitor the health of the unit and improve the device performance. -
Page 18: Appendix A - Specifications
QTM-DMC10 Device Manual APPENDIX A – SPECIFICATIONS Dimensions 36 x 36 x 11 mm Weight 13 g Accuracy 1.5mm Update Rate 20 Hz Battery Power SONY Lithium CR2032 Coin Cell Battery Life Up to 6-months Maximum Range Wi-Fi Coexistence Bluetooth Coexistence... -
Page 19: Appendix B - Mechanical Drawings
QTM-DMC10 Device Manual APPENDIX B – MECHANICAL DRAWINGS QTM-DMC10 2022-11-07... -
Page 20: Mount
QTM-DMC10 Device Manual MOUNT ASSEMBLED QTM-DMC10 WITH MOUNT Insert mech drawing of assembly 2022-11-07...
Need help?
Do you have a question about the QTM-DMC10 and is the answer not in the manual?
Questions and answers