1. Manuals
  2. Brands
  3. AFRISO Manuals
  4. Network Hardware
  5. ACC2
  6. Quick start manual

AFRISO ACC2 Quick Start Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CONTENTS:
About this manual ...........................1
Safety information... ..........................2
Security Notices.......................... 2.1
Safety Symbols.............................2.2
Product description .........................3
Application example.. ............... 3.1
Checklist ..........................................4
Before installation ....................4.1
After installation .......................4.2
Important information ...............4.3
Repair .......................................4.4
Assembly .........................................5
Electrical connection ..........5.1.2
Connection overview ..........5.1.3
Installation of sensors...................5.2
Connection example.....................5.3
Relay ...................................5.3.1
Separator alarm OSA..........5.3.2
Pressure level (4-20mA) EX.....5.3.5
MicroTREK (4-20mA)...........5.3.6
EchoTREK (4-20mA)............5.3.7
EasyTREK (4-20mA)............5.3.8
Commissioning ................................6
Operation .........................................7
Cloud service portal ..................7.1
Maintenance ....................................8
Maintenance of sensors ............8.1
Troubleshooting ........................8.3
Technical data .................................9
IoT Gateway ACC2 .......................9.1
Declaration of Conformity (DoC)....10
Save this manual for
future reference!
Edition 0.9 - 23-08-09
Afriso Ema AB
Kilvägen 2 • SE-232 37 Arlöv
Sweden
+46-(0)40-92 20 50
www.afriso.se
ACC2
Afriso Cloud Connect

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ACC2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AFRISO ACC2

  • Page 1: Table Of Contents

    ACC2 CONTENTS: About this manual ......1 Afriso Cloud Connect Safety information......2 Security Notices......2.1 Safety Symbols......2.2 Regulations regarding ACC2..2.3 Product description ......3 Application example....3.1 Checklist ..........4 Before installation ....4.1 After installation .......4.2 Important information ....4.3 Repair ........4.4...

  • Page 2: About This Manual

    ACC2 IoT gateway • Installation About this manual This manual describes the IoT gateway ACC2. This user manual is part of the product. • You may only use the product if you have read and understood the user manual fully.

  • Page 3: Safety Information

    DESCRIPTION Critical warning, risk of personal injury Warning risk of damage to equipment or person Attention is required Note ! Regulations regarding ACC2 SYMBOL DESCRIPTION Note ! Read instructions before installation Installation may only be carried out by a qualified installer...

  • Page 4: Product Description

    IoT gateway • Installation Product description ACC2 is an IoT gateway that consists of an electronic device that you can plug in 4 digital (0/1) and 2 analog sensors that communicate via the 4G network to AfrisoCloud, which is a cloud service solution for the presentation of measurement values on internet connected devices.

  • Page 5: Assembly

    ACC2 Installation • IoT gateway Assembly Assembly of electronics unit Note ! Read instructions for installation Installation may only be carried out by a qualified installer • Mount the electronics unit on a even wall at eye level. • Check that the electronics unit is easily accessible and easy to monitor.

  • Page 6: Connection Overview

    ACC2 IoT gateway • Installation 5 4 3 2 1 3 2 1 3 2 1 3 2 1 5.1.3 Connection overview 1 = connection terminals J4/1 = Sensor feed (DC feed sensor) J4/2 = ADC-1, Analog input (4-20mA eller 0-10V)

  • Page 7: Installation Of Sensors

    ACC2 Installation • IoT gateway Installation of sensors Cables should be installed mechanically protected Sensors are mounted according to the description in their manual. Record as many measurements as possible to facilitate continued set-up in the cloud service portal. See 7.1.

  • Page 8: Separator Alarm Osa3

    ACC2 IoT gateway • Installation 5.3.3 Separator alarm OSA3 OSA3 - Relay input R1 = programmable function (sensor-specific or total alarm) Common (C) is connected to terminal J6/1 (DIG_IO-1) and NC is connected to terminal J4/3 (GND) In the event of an alarm, the relay switches and in the Sitevisual portal the value changes from 1 to 0.

  • Page 9: Commissioning

    ACC2 Installation • IoT gateway Commissioning Note ! Make sure that the electronics unit and sensor are installed according to instructions in previous points. Handling at startup 1 = Status LED 2 = Status LED for mobile connection Checks at start-up of electronics unit Check that all connections and assembly are correctly performed before voltage connection.

  • Page 10: Operation

    ACC2 IoT gateway • Installation Operation After commissioning and if no status LEDs are red, the ACC2 is ready for use. Cloud service portal When everything is installed according to instructions, Afriso needs to be contacted to complete the set-up. Prepare the following information:...

  • Page 11: Maintenance

    ACC2 Installation • IoT gateway Maintenance ACC2 does not need any actual maintenance. Check that the enclosure and wiring are complete and clean. Open the lid and check that the LEDs are green. Maintenance of sensors For sensor maintenance, consult the sensor’s own manual.
  • Page 12 ETSI EN 301 908-1 v.13.1.1 (2019-11) (Parts of) ETSI EN 301 908-13 v.13.2.1 (2022-02) (Parts of) ETSI EN 303 413 v.1.2.1 (2021-04) (Parts of) Signed for and on behalf of Afriso Ema AB Date of issue: 2024-01-30 Signature of authorized person:...

Table of Contents