Advertisement
Quick Links
Product Description
TST-1080 - Wireless Tablet
Notes and Recommendations
Important note: Please be aware if the Cloud Configuration Service Connection setting is enabled (this
is enabled by default), and the device is not claimed by XiO Cloud the touch screen will not go into
suspend mode. If you are not using XiO Cloud, please make sure to disable this setting and reboot the
touch screen.
The TST-1080 supports the following for wireless connectivity, and in general designed to work with any
Wireless Access point that meet these specifications.
IEEE 802.11ac/b/g/n/ax Wi-Fi® communications (2.4 and 5 GHz 2-way RF)
DHCP
However, for customer guidance Crestron has tested the TST-1080 with the following access points.
•
Eero Pro 6E
•
Ubiquiti U6 Enterprise
•
Ruckus R560
•
Pakedge wk-2
•
Luxul XAP-1610
•
Aruba AP-635
•
Araknis 520/Araknis 820
•
Cisco C9115AXI
System Requirements and Dependencies
Other software versions:
•
Crestron HTML5 2.4.1
•
Crestron Construct for Windows 1.2701.0035
•
Crestron Construct for macOS 1.2701.0035
•
SIMPL Windows 4.2500.04.00
•
Toolbox 3.1310.0048
TST-1080
Version 1.001.0104
5
, static IP or dynamic IP via
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Crestron TST-1080
Summary of Contents for Crestron TST-1080
- Page 1 If you are not using XiO Cloud, please make sure to disable this setting and reboot the touch screen. The TST-1080 supports the following for wireless connectivity, and in general designed to work with any Wireless Access point that meet these specifications.
- Page 2 And if the firmware upgrade fails for any reason, the auto-update will be retriggered 10 more times. The TST-1080 touch screen will not show a firmware update needed message if the firmware version on the touch screen is same as that in Auto-update server firmware version.
- Page 3 • Repeat the reboot cycles using the reset button for a total of 10 times. • You can press the reset button for the next cycle as soon as you see a Crestron logo on the display. • TST-1080 touch screen will show a “System Maintenance” screen with “Reboot” and “Factory Restore Menu”...
-
Page 4: Version History
When the device battery reaches below 3%, device connection status (Offline) will reflect after 17 minutes. Application Mode Support • Custom Projects – Only Crestron HTML5 projects (does not support Smart Graphics Project, use Crestron Construct to convert SG projects to CH5) • Crestron Home – version 3.21.19... - Page 5 • On rare occasions, after a firmware upgrade, the touch screen was stuck booting up showing the Crestron logo, resetting the touch screen will clear the problem. Known Limitations •...
Need help?
Do you have a question about the TST-1080 and is the answer not in the manual?
Questions and answers