Advertisement
Quick Links
Advertisement
Summary of Contents for Rovin MMA010
- Page 1 MMA010 Inflatable Stand Up Paddle Board INSTRUCTION MANUAL...
-
Page 2: General Information And Safety Instructions
GENERAL INFORMATION & SAFETY INSTRUCTIONS Paddle sports can be dangerous and physically demanding. Users of this product should understand that participating in stand up paddling can result in serious injury or death. Observe all applicable watercraft laws, and use common sense Safety Check list •... -
Page 3: Usage Instruction
USAGE INSTRUCTION • Assume a comfortable stance with your feet positioned roughly shoulder width apart Knees slightly bent in a relaxed upright stance, shoulders back, looking straight ahead. • Paddle grip. Place your top hand on end of handle and your bottom hand approximately 24”... - Page 4 Board Inflation Steps Make sure that the valve is in the closed position (valve pin up) Make sure the pump hose is connected to the “inflate“ outlet Connect the pump nozzle into the valve receptacle. Start pumping air into the board by sliding the pump piston up and down.
- Page 5 • Do not over-inflate the board. A max pressure of 10 - 14 PSI is adequate. The easiest gauge of a good working pressure is to have the chambers inflated to a firm pressure when you press on them. • Do not pump to a high pressure and let the board sit out in the sun.
- Page 6 BOARD CARE & STORAGE We have chosen high quality PVC to provide superior protection from ultraviolet light. However, to ensure extra years of flexibility and bright colors, avoid storing the board where it will be exposed to weather or in direct sunlight. Please review the following list for storage and board care tips.
- Page 7 If the board is losing air and all the valves are good, you probably have a small puncture. Small punctures can be repaired easily and permanently. Spray around the inside and outside of the board until air bubbles become visible and mark the position of the leak. If you do not find air bubbles, inflate the board to maximum air pressure and try to listen to find the leak.
-
Page 8: Warranty Information
WARRANTY INFORMATION Our product is guaranteed to be free from manufacturing defects for a period of 12 Months. If your product becomes defective during this period, Electus Distribution will repair, replace, or refund where a product is faulty; or not fit for intended purpose.
Need help?
Do you have a question about the MMA010 and is the answer not in the manual?
Questions and answers