Summary of Contents for Green Digital Power-tech BM200 Series
- Page 1 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD BM200-** Battery Tester-Charger-Discharge-Maintainer User Manual REV2.0 Revision Date：Feb 2024 Features...
- Page 2 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD BM200-xx is an intelligent instrument that integrates the four functions of battery testing(analyzing), charging, discharging and maintenance. It is designed with a portable aluminum alloy shell, color TFT display. BM200 is widely used for performance testing and routine maintenance of most power batteries and energy storage batteries.
-
Page 3: View Of Product
SHENZHEN GREEN DIGITAL POWER TECH CO., LTD View of product P/N:BM200-32 AC Input port Caution:this instrument is designed for 2~100Ah 3.6/3.7~25.2/25.9V Li-ion, 3.2V~25.6V LiFePO4,2V~24V AGM [VRLA,GEL],2.4~21.6V NIMH batteries’ capa LCD Displayer city, SOD,and SOH testing, charging/discharging curve measuring, recover & maintaining Buttons：... - Page 4 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD How to use 1.Connect battery: Before use, please confirm the battery unit you connect (BM200- 32 voltage does not exceed 30V,BM200-05 voltage does not exceed 4.8V), please use the special red and black crocodile cable delivered by the machine, connect the red to the positive electrode of the battery, connect the black to the negative electrode of the battery, and connect the fine red and black cables matching the red and black crocodile cable to the voltage sampling interface.
- Page 5 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD Note: Following examples are all based on BM200-32 @ 12V12Ah PB-Acid battery. 3.Set Battery Parameter： BM200 can be used for many types batteries. To get the accuracy test results and charge safety, at first you should set the connected battery parameters.
- Page 6 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD 0.8*rating voltage.This step can be skipped, BM200 will auto set a good default data. Note: [Battery type], [Battery voltage], and [Battery capacity] is necessary forsetting process, the rest 5 items can be skipped if you have no special request. Press <Up>...
- Page 7 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD shown in the following figure. Batt Type Batt Vol 14.8/14.4 Batt Cap Chg Vol 16.80 Chg Cur Batt Res mΩ Dis Cur End Vol 12.6 Over Tem ℃ Save Exit The remaining parameters are modified similarly. After that, press <Save>.
-
Page 8: Main Functions
SHENZHEN GREEN DIGITAL POWER TECH CO., LTD seconds, and the system will return to the home page to reset battery parameters. 4. Main functions 4.1 [Test]: Measure battery voltage, internal-resistance, SOC and SOH within 5 seconds SOC, means State-of-charge of battery, range is 0 ~ 100%. SOH, means State-of-health of battery, range0~100%. - Page 9 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD 12.0V 12Ah S O C : S O H 100%R Charge Battery voltage R E S : 30mΩ Time Run 0h49m 13.55V Cap : 1.9Ah 2.35A Battery current After battery is fully charged, the display screen will two different display contents: 12.0V 12Ah 12.0V...
- Page 10 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD Press <Up> or <Down> key again, you can switch the graph and list pages alternately. [Discharge]: Automatically discharge according to the selected parameters;During discharging process, screen will be following view: 12.0V 12Ah S O C : S O H 100%R Discharge...
- Page 11 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD Press <Up> or <Down> key again, you can switch the graph and list pages alternately [Maint]: Automatic maintenance based on selected battery paramete For batteries that have been idle for more than 6 months or have been floating charged for a long time, it should be regularly (preferably every 6 months or so)standard charging and discharging maintenance process.
- Page 12 APP, and remotely set and control the working status of the BM200. Currently, the BM200 series only provides Android apps. For Appendix BM** APP for Android Ⅰ...
-
Page 13: Specification
SHENZHEN GREEN DIGITAL POWER TECH CO., LTD Specification Items model BM200-05 [B, D] BM200-32 [B, D] AC input power 100~240V 50HZ Suitable battery type Pb-Acid(AGM, VRLA, Gel), Li-Ion, LiFePO4, NiMH, NiCd PreCharge -- C.C main charge -- special charge CV or CC -- Charging method end charge Suitable battery... -
Page 14: Safety Notes
SHENZHEN GREEN DIGITAL POWER TECH CO., LTD Safety notes Be sure to understand the information of the battery to be charged or discharged accurately. If the parameters is set up incorrectly the battery may severely be damaged. Especially Lithium battery can cause a fire or an explosion by over-charging. -
Page 15: Brief Introduction
SHENZHEN GREEN DIGITAL POWER TECH CO., LTD Appendix : BM** APP for Android Ⅰ Brief introduction This APP software is designed for BM** family Battery Tester-Charger-Discharger- Tender, as a convenient user tool. This software is used to pair, connect and communicate through BLE Bluetooth. -
Page 16: Connect Bluetooth
SHENZHEN GREEN DIGITAL POWER TECH CO., LTD Connect Bluetooth: Click [SEARCH BLE] button, find your BM** device and select it. Note: Before use, you need to give the software Bluetooth permission and location permission and open Bluetooth and location, otherwise you will not be able to search for Bluetooth devices. Note: Once the BM device is successfully connected to the mobile phone or tablet computer through Bluetooth, the function keys on the BM panel will be temporarily frozen and disabled. - Page 17 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD Please see page 5 (section 3.1) to learn how to set all these parameters value. Note: [Battery type], [Battery voltage], and [Battery capacity] is necessary for setting process, the rest items can be skipped if you have no special request.
-
Page 18: Running View
SHENZHEN GREEN DIGITAL POWER TECH CO., LTD LiFePO4 12.8 V 20.0 Ah 14.4 V mΩ 10.0 V 60.0 ℃ Below the preview parameters are four function key buttons: [CHARGE], [DISCHARGE], [MAINTAIN] and [RETURN]. Click the function key to enter the corresponding operation interface. - Page 19 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD 12.8V 10.0Ah LiFePO4 Charging…… CH Volt Curr Res Capa SOC SOH mΩ 01 14.31 4.01 11.2 8.8 Run Time: 2h 45m After charging or discharging done, click the [SHOW CURVE] button to enter the charging and discharging curve viewing interface.
-
Page 20: Software Introduction
: Introduction to BM_Client software Ⅱ Software introduction This software is the supporting application software of BM200 series battery detection, charge, discharge and maintenance instrument. The software is paired, connected and communicated with the battery detection and maintenance instrument through RS485, through which the user can view the historical charge and discharge data and curve of the battery pack on the computer, and remotely set and control the working state of the device. - Page 21 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD Click "中文" in the lower right corner to switch languages, and the interface shown below will be displayed： Select "485 Mode" in the lower left corner and click "Connect ", the following pop-up window will appear in the middle of the screen:...
- Page 22 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD If the item bar of "Serial Port Number"（串口号） is blank, please click the lower left corner to "refresh the device"（刷新设备）, or the inverted triangle identifier on the right side of the item bar will pop up the corresponding serial port number. Note: The serial port number is slightly different according to the computer model.
-
Page 23: Parameter Setting
SHENZHEN GREEN DIGITAL POWER TECH CO., LTD 2. Parameter setting : After the communication connection is successful, you can modify the parameters in the "Battery Parameter Setting" list on the left of BM_Client. For example, if the battery parameters are lithium, 3.7V, and 4Ah, you can modify the parameters as shown in the following figure: Click the blue box "Check"... - Page 24 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD At the same time, the BM200 automatically modifies the battery parameters. The following figure is displayed: Batt Type Batt Vol 3.7/3.6 Batt Cap Chg Vol Chg Cur Batt Res mΩ Dis Cur End Vol Over Tem ℃...
- Page 25 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD After the parameter modification is completed, the device can be controlled for charge and discharge test, and can be selected to run according to their actual needs Four functions (quick detection, single charge, single discharge, automatic maintenance), in the process of charging, discharge, maintenance and other any process, the user can click the "pause recovery"...
- Page 26 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD Open the "BatteryTestData" folder, and the BM_Client software will write a set of data to the generated table every minute during the charge and discharge process, as shown in the figure: The table in the red box is generated during the current charge and discharge process.
- Page 27 SHENZHEN GREEN DIGITAL POWER TECH CO., LTD...
Need help?
Do you have a question about the BM200 Series and is the answer not in the manual?
Questions and answers