Table of Contents
Advertisement
dCS Scarlatti Clock User Manual
Display
In normal use, the clock frequency is shown at the top of the display (D), for example:
The icons at the bottom show the current settings or operating conditions. From the left, these are:
• Temperature stabilised, if the icon is displayed.
•
Dither
on, if this icon is displayed.
•
Coupling
menu setting
• If the unit is locked to an external reference,
connected but the unit cannot lock to it,
Details of the menu displays are shown in the Menu section on page 12.
FREQUENCY
Button
Use the
FREQUENCY
setting is 44.1kHz.
MENU
Button
Press the
MENU
button (F) to open the menu, select menu pages and change settings. See the Menu
section on page
12
for information on using the menu features.
Remote Control Receiver
Aim the remote control handset towards the receiver (G) for best sensitivity.
Filename: Scarlatti Clock Manual v1_0x.doc
(TTL
is shown, the alternative is Bipolar).
SYNC
button (E) to set the clock frequency to either
SYNC
is displayed instead. If an external reference is
is displayed greyed out.
Page 10
Software Issue 1.0x
June 2008
44.1kHz
or 48kHz. The usual
English version
Advertisement
Table of Contents
