Advertisement
Advertisement
Table of Contents
Summary of Contents for Spa Sciences NasalFresh MD
- Page 1 Owner’s Manual...
- Page 2 Congratulations On Your Purchase of the NasalFresh Nasal Irrigation System! You’ve made a smart choice for your nasal health. The NasalFresh system is designed to provide effective relief for chronic or acute rhinosinusitis, seasonal allergies, colds and flu, post-nasal drip, or if you simply want optimal nasal health. With its innovative powered rinse and suction technology and user-friendly design, you’ll Breathe Better, and Feel Healthier.
- Page 3 Getting to Know your NasalFresh Detailed view. NasalFresh...
-
Page 4: Getting Started
Getting Started Your NasalFresh comes substantially assembled. To complete the assembly, detach the Lower Tank from the Mechanical Module by grasping the Module with one hand and the Tank with the other and pulling the Tank away from the Module. Remove contents of the Lower Tank and set aside. - Page 5 1. Connect the USB Cable. Plug one end of the USB cable into the USB port on your power adapter. Lift up the silicone protective strip over the Charging Port on the Mechanical Module and connect the other end of the cable to the Charging Port.
- Page 6 Making Saline Preparation. Saline is a mixture of sodium chloride and water. Remove the Lid. Fill the Upper Tank to the 300ML fill line with room-temperature to lukewarm distilled or other safe water. Add one or two NasalFresh nasal salt packets and stir until fully dissolved.
- Page 7 Powering On Turn your NasalFresh on by pressing the Power Button on the Mechanical Module. A green pilot light next to the ON/OFF Button will come on indicating the Device is in standby mode and ready to use. Cleansing Modes NasalFresh has 3 Cleansing Modes - gentle, medium, and high.
-
Page 8: Powering Off
Powering Off Pressing the Power Button a fourth time will turn the Device off. Using Your NasalFresh Remove the Hand Control from the Storage Opening and extend the Hose. Run a little water over the Nasal Pillows to make them easier to seal against the nose. - Page 9 Relax your jaw and breathe normally through your mouth. Press and hold down the Activate Button on the Hand Control. The pumps will start, and the drain valve will open causing saline to flow from the Upper Saline Tank through the 2-Way Hose into one nostril, around the back of the nose, and out the other nostril (as shown).
-
Page 10: Frequently Asked Questions
Frequently Asked Questions • How is NasalFresh different from other nasal irrigators? NasalFresh is the only nose cleaner of its kind with two precision pumps to provide powered rinse and suction. The powered rinse pushes the saline into the nostril and around the back of the nose where the powered suction can draw the saline out of the other nostril flushing away the allergens, mucus, bacteria, and viruses. - Page 11 Feel healthier. With a little practice, you should be fine. • Do I have to use the salt packets that come with the NasalFresh MD? No. NasalFresh may be used with most nasal saline refills. However, our salt packets contain just the right amount of salt for the larger water reservoir in the NasalFresh.
-
Page 12: Cleaning And Drying
Cleaning and Drying DO NOT place the NasalFresh in a dishwasher or microwave. DO NOT immerse the Mechanical Module in or rinse with water. Upper and Lower Tanks. After each nasal wash, dispose of the wastewater in the Lower Tank. Detach both Tanks from the Mechanical Module and hand-wash with unscented moisturizer-free antibacterial liquid soap (“Antibacterial Liquid Soap”). -
Page 13: Important Safety Instructions
Important Safety Instructions • READ ALL INSTRUCTIONS IN THIS OWNER’S MANUAL BEFORE USING THIS DEVICE. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. • THIS DEVICE IS FOR HOUSEHOLD USE ONLY. • DO NOT use tap water unless sterilized by boiling. Only use water that is distilled, micro-filtered or previously boiled and allowed to cool to lukewarm or room temperature. - Page 14 • DO NOT use water hotter than 90°F or 32° C. • Clean this Device, including Nasal Pillows, according to the instructions in this Owner’s Manual. Do not share Nasal Pillows to avoid cross infection between users. • DO NOT place this Device in a dishwasher or microwave. •...
-
Page 15: Limited Two-Year Warranty
Limited Two-Year Warranty (U.S. and Canada Only) Spa Sciences will repair or replace (at our option) your Device free of charge for 24 months from the date of purchase if the Device is defective in workmanship or materials. To obtain service under this warranty, email us at Customerservice@ nasalfreshmd.com or call 772.310.8007 for return instructions and return the defective... - Page 16 WHO IS COVERED. This warranty applies only to the original purchaser of the Device from Spa Sciences or an authorized reseller. The warranty cannot be transferred under any circumstances. PRODUCT REGISTRATION. You must register your Device within 90 days of purchase in order to obtain the warranty.
- Page 17 MANUFACTURER Spa Sciences Port St. Lucie, Florida 34986 www.spasciences.com...
Need help?
Do you have a question about the NasalFresh MD and is the answer not in the manual?
Questions and answers
The indicator light when charging doesn’t come on isn’t it supposed to be red and then turn green when it’s charged?
If the indicator light on the Spa Sciences NasalFresh MD does not turn red when charging, it may not be properly connected to the USB power source, or the cable may not be correctly plugged into the Charging Port on the Mechanical Module. Ensure the silicone protective strip is lifted and the cable is securely connected. If the connection is correct and it still doesn't light up, the device or cable may be faulty.
This answer is automatically generated
my nasalfreshmd has green light but won't go on
If the Spa Sciences NasalFresh MD shows a green light but does not turn on, it may be in standby mode. You need to press the Power Button again to activate one of the cleansing modes. The green light indicates the device is ready, but not yet operating.
This answer is automatically generated
My NasalFresh blows water back in the upper tank. Can’t get water to pump through lines at all. Unit is brand new and this is the first attempt to use it.
The Spa Sciences NasalFresh MD may be blowing water back into the upper tank and not pumping through the lines due to incorrect setup, blockage, or malfunction. Possible causes include:
1. The lid on the Upper Tank may not be properly secured.
2. The lines may be clogged or kinked, preventing flow.
3. The pump may not be functioning correctly.
4. The Activate Button may not be held down, so the pump is not running.
5. The direction of flow may not have been reversed properly if the procedure was paused midway.
Check setup, ensure the lid is sealed, lines are clear, and hold the Activate Button to operate the pump.
This answer is automatically generated
Power button on handheld has only worked intermittently since purchase. Now will not come on at all.
If the power button on the Spa Sciences NasalFresh MD handheld device is not working, ensure the device is fully charged using the included USB cable and a compatible power adapter. If it still does not power on after charging, the device may be defective and should be replaced by the company.
This answer is automatically generated
The activate button on the hand control is not working when I use it.