Bluetooth Pairing; Battery Level Check - MONSGEEK M1 V5 VIA ISO User Manual

M1 V5 ISO Wireless/Wired Connection Guide
E
R
Bluetooth-Pairing
After turning on the keyboard, press FN+E/R/T to enter Bluetooth mode. Press and hold the FN+E/R/T combination keys
for 3 seconds to put the keyboard in pairing mode, with the blue indicator light flashing quickly. Once the connection is
established, the indicator light will stay on for 2 seconds. lf the device fails to connect, the indicator light will turn off and
thekeyboard will enter sleep mode.
2.4G-Pairing
After turning on the keyboard, press FN+Y to enter 2.4G mode. Then press and hold theFN+Y combination key for 3
seconds to enter pairing mode. Then insert the receiver, and Thegreen indicator light will flash quickly. Once the pairing
is successful, the LED indicator will stay on for 2 seconds, lf no available device is found within 30 seconds, the LED
indiactor willturn off and the keyboard will enter sleep mode.

Battery Level Check

In wireless mode, please press FN+Spacebar combination keys to check the battery level.If the battery level is less than
30%, the 1-2 keys wil light up red. lf the battery level is lessthan 100%, the 1-9 keys will light up green, and if the battery
level is full, the 1-0 keys willlight up green.
Fn
Bottom
04