Advertisement
Quick Links
FOOD WASTE DISPOSER
INSTRUCTION MANUAL
NOTE:
NOTE:
NOTE:
IMPORTANT:
CAUTION:
Model Number*
*Above information appears on the label affixed to bottom of the disposer. For your convenience,
write down the model and serial number prior to
Warranty. Staple receipt or proof of purchase to this manual for easy reference.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY
TO PERSONS. SAVE THESE INSTRUCTIONS.
WARNING - When using electrical appliances,
basic precautions should always be followed,
including the following:
1. Read all instructions before using the appliance.
2. To reduce the risk of injury, close supervision is
necessary when an appliance is used near
3. Do not put fingers or hands into a waste disposer.
4. Turn the power switch to the off position before
attempting to clear a jam or remove an object from the
disposer.
5. When attempting to loosen a jam in a waste
use a long wooden object such as a wooden spoon or
the wooden handle of a broom or mop.
6. When attempting to remove objects from a waste
disposer use long-handled tongs or
disposer is magnetically actuated, non-magnetic tools
This Food Waste Disposer has been designed to operate on 220-240V, 50-60 Hz for
Australia
exclusively.
Using any other voltage or Hz adversely affects performance.
In Australia, all plumbing and electrical work must be completed by a qualified
tradesperson. This product may require approval of the relevant regulator and/or
the sewerage system operator. Disposer must be installed to AS/NZS 3500.2
standard requirements.
Make sure that the installation of this appliance is allowed by the authorities.
Read all instructions thoroughly. Keep this guide for future reference.
Be sure to review SAFETY INSTRUCTIONS FIRST PERTAINING TO A RISK OF
FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS before using disposer.
Warranty is non-transferable.
children.
disposer,
pliers.
Proof o purchase is required for
installation.
should be
used.
7. To reduce the risk of injury by materials that may be
expelled by a waste
into a
disposer:
cleaners or similar products; glass, china or plastic;
large whole bones; metal, such as bottle caps, tin
cans,
aluminum foil or utensils; hot grease or other
hot liquids; whole corn-husks.
8. When not operating a disposer, leave the stopper in
place to reduce the risk of objects falling into the
disposer.
9. DO NOT operate disposer unless splash guard is in
place.
For proper grounding instructions see the ELECTRICAL
CONNECTIONS portion of this manual.
If the
The receptacle to which this appliance is
connected must be controlled by a switch.
1
Serial Number*
disposer,
do not put the following
clam or oyster
shells;
caustic drain
Advertisement
Summary of Contents for ABEY WDU-1AU
- Page 1 FOOD WASTE DISPOSER INSTRUCTION MANUAL This Food Waste Disposer has been designed to operate on 220-240V, 50-60 Hz for NOTE: Australia exclusively. Using any other voltage or Hz adversely affects performance. In Australia, all plumbing and electrical work must be completed by a qualified NOTE: tradesperson.
- Page 2 TYPICAL INSTRUCTIONS, YOUR MODEL MAY VARY. Before starting this step, turn off electrical Caution: Be sure to support the disposer while power at the circuit breaker or fuse box. Unplug performing this step or it may fall when the mounting disposer.
-
Page 3: Installation Of Mounting Assembly
3. INSTALLATION OF MOUNTING ASSEMBLY READ CAREFULLY AND COMPLETELY BEFORE STARTING STOPPER REMOVABLE SPLASH GUARD SINK FLANGE FIBER GASKET MOUNT TAB LOWER MOUNT RING SUPPORT FLANGE UPPER MOUNT RING MOUNT SCREWS DISPOSER DISHWASHER RETAINER RING INLET CUSHION RING* NOTE: Cushion Ring included between the Upper Mount Ring and Lower Mounting Ring. - Page 4 c. Be sure the sink is clean. Load the underside rim of the sink flange Removable Splash Guard with plumber's putty (1). From top of the sink, push the sink flange Sink Flange down against the sink opening to make a good seal (2). DO NOT Plumber's Putty (not included) MOVE OR ROTATE the sink flange once it has been seated or the Groove...
-
Page 5: Tips For Successful Operation
The receptacle to which this appliance is A. Connect disposer to appropriate household current connected must be controlled by a switch. only. WARNING: IMPROPER CONNECTION OF THE EQUIPMENT-GROUNDING CONDUCTOR CAN RESULT IN A RISK OF ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICEMAN IF YOU ARE IN DOUBT AS TO WHETHER THE APPLIANCE IS PROPERLY GROUNDED. - Page 6 Warranty is determined by the unit serial number and the date of installation. Purchase or installation receipt may be required to verify warranty status. Abey WDU-1AU 3-Years Abey WDU-3ASAU 8-Years Abey WDU-4ASAU 10-Years SERVICE: If service is required, contact Abey or your dealer.
- Page 7 Disposer Air Switch Assembly is supplied in three basic parts: The Actuator which consists of: 1. Actuator Button 2. Actuator Nut 3. Actuator Outlet (Black Threaded portion) The Air Switch Sensor is installed into disposer. Only the air tube Nozzle is visible from the outside of the disposer.
Need help?
Do you have a question about the WDU-1AU and is the answer not in the manual?
Questions and answers