LED Description ....................10 Data Processing ....................... 11 Data Copy ...................... 11 POS Solving ....................12 Equipment Maintenance..................16 Firmware Upgrade ..................16 Upgrade indicator sounds ................16 CHCNAV C30 OBLIQUE PHOTOGRAPHY SYSTEM USER MANUAL | 2022-12 P a g e | 2...
It is recommended for user to read above documents before first time using. 1.3 Service & Support CHCNAV website: http://www.chcnav.com Service Hotline: 400-620-6818 Wechat public: CHCNAV C30 OBLIQUE PHOTOGRAPHY SYSTEM USER MANUAL | 2022-12 P a g e | 3...
If the service life of equipment is affected due to improper use or maintenance, even broken, CHCNAV will not bear the relevant responsibility. All repairs and maintenance services resulting from this will be charged at standard prices.
The recommended storage environment is less than 40% relative humidity and a temperature of 20±5 CHCNAV C30 OBLIQUE CAMERA SYSTEM USER MANUAL | 2022-12 P a g e | 5...
CHCNAV Alphaport or DJI Skyport, which can install on different drone platforms. C30 has small, light and easy to carry design, and supports single person operations. One button control of the device acquisition, easy to operate and quick to get started.
Oblique lens: 35mm Valid pixels 130MP (26MP*5) Store methods Removable memory card Data copy speed 300Mb/s Minimum photo interval 0.6s Aperture size F5.6 ISO range 100~3200 CHCNAV C30 OBLIQUE CAMERA SYSTEM USER MANUAL | 2022-12 P a g e | 7...
Remove camera from aircraft when transportation and storage, to avoid reduced life of Alphaport due to bumps. ▪ Recommend remove camera after powering off aircraft. CHCNAV C30 OBLIQUE CAMERA SYSTEM USER MANUAL | 2022-12 P a g e | 8...
KML. ▪ Choose C30 camera type in the route parameter settings, if this camera option is not available, user need to manually define a set of parameters: photo resolution (6252px wide, 4168px high), sensor size (23.5mm wide, 15.6mm high), focal length (25mm)
5.4 LED Description Indicator Light Description Solid green Ready to take off Quick blink green Camera is preparing Slow blink green Capturing Solid red Abnormal CHCNAV C30 OBLIQUE CAMERA SYSTEM USER MANUAL | 2022-12 P a g e | 10...
POS solving. ▪ Please do not disconnect the memory module or U-LINK copier during the copying process as this may cause irreparable damage to the data. CHCNAV C30 OBLIQUE CAMERA SYSTEM USER MANUAL | 2022-12 P a g e | 11...
GPS/base directory. Go back to the data processing interface and right click on the project, select POS solution, after entering the solution CHCNAV C30 OBLIQUE CAMERA SYSTEM USER MANUAL | 2022-12 P a g e | 12...
Page 13
OK. (If you are using M300 for data collection, you can skip this step) ▪ Right click project name and choose display trajectory to load flight route on trajectory view. CHCNAV C30 OBLIQUE CAMERA SYSTEM USER MANUAL | 2022-12 P a g e | 13...
Page 14
▪ Select project then click Export. Check “Organize Pictures” then click Ok to process picture POS. CHCNAV C30 OBLIQUE CAMERA SYSTEM USER MANUAL | 2022-12 P a g e | 14...
Page 15
When process finish, there is a Result node appear. Right click then choose “Open Directory” to open result folder. User can find picture coordinates information. CHCNAV C30 OBLIQUE CAMERA SYSTEM USER MANUAL | 2022-12 P a g e | 15...
Copy the firmware upgrade package files to the root directory of the CAM_M+L+R+B+H disk of the memory module respectively. ▪ Insert the memory module into the card slot of the C30 load and install the C30 correctly on the aircraft. ▪...
Page 17
Qingpu District, 201703 Shanghai, China Tel: +86 21 542 60 273 | Fax: +86 21 649 50 963 Email: sales@chcnav.com | support@chcnav.com Skype: chc_support Website: www.chcnav.com CHCNAV C30 OBLIQUE CAMERA SYSTEM USER MANUAL | 2022-12 P a g e | 17...
Need help?
Do you have a question about the C30 and is the answer not in the manual?
Questions and answers