Page 1
MENARDS ITEM #641-8995 #641-8996 MODEL #6143ST-25-102 #6143ST-25-104 ATTACH YOUR RECEIPT HERE 25” ELECTRIC STOVE ASSEMBLY, CARE & USE INSTRUCTIONS Serial Number__________________ Purchase Date__________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-571-1044 9 a.m. - 5 p.m., EST, Monday - Friday. www.greentouchhome.com.
HARDWARE CONTENTS (not shown actual size) Screw Qty. 13 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC rules.
SAFETY INFORMATION IMPORTANT INSTRUCTIONS When using electric appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: WARNING • l l a • DO NOT plug the power cord into a source of power during unpacking and assembly.
SAFETY INFORMATION • If possible, ALWAYS unplug this appliance when not in use. • DO NOT use outdoors. • This item is not intended for use in bathrooms, laundry areas and similar indoor locations. NEVER place heater where it may fall into a bathtub or other water container. •...
Page 6
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 15 minutes Tools Required for Assembly (not included): Phillips screwdriver ASSEMBLY INSTRUCTIONS CAUTION:...
Page 7
OPERATING INSTRUCTIONS Body Remote Control To use the remote control, first remove the plastic tab by gently pullling it out of remote control (C). Power Button • Press the power button to turn the main power to the unit ON or OFF. •...
Page 8
OPERATING INSTRUCTIONS Flame Brightness Setting • The flame brightness mode is used to set the flame brightness. • Use the up arrow button or down arrow button to scroll through the flame brightness settings: F0 (flame off, lowest brightness of ember bed), F1, F2, F3, F4, F5 (brightest). Up Arrow Button •...
CARE AND MAINTENANCE • Make sure the unit is turned OFF, unplugged and the heating elements of Electric stove are cool whenever you are cleaning the heater . • i r t , t f DO NOT use brass polish or household cleaners as these products will damage the metal trim.
Page 10
CARE AND MAINTENANCE Replacing the Remote Control Battery When the remote control (C) stops operating or its range seems reduced, it is time to replace the battery. Note: The battery should be removed if the product is to be left unused for a long time. of the remote control (C).
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Error E1 displayed on The overheat Unplug unit, wait 15-20 minutes, then the sensor will sensor has been reset itself. Plug the unit back in and turn on the control panel with engaged. heater. If the problem persists, call customer service. beeping sound.
ONE-YEAR LIMITED WARRANTY The manufacturer warrants that your new Electric Stove is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. Install and operate this Electric Stove in accordance with the installation and operating instructions furnished with the product at all times.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-855-571-1044, 8 a.m. - 8 p.m., EST, Monday - Friday. PART DESCRIPTION PART # Remote control 6143ST-25-102-104-REMOTE...
Need help?
Do you have a question about the 6143ST-25-102 and is the answer not in the manual?
Questions and answers