8.0 Warning and points of attention ................9 9.0 Warranty conditions ..................... 10 1.0 Introduction Congratulations with the purchase of this high-quality ACT product! This product has undergone extensive testing by ACT’s technical experts. Should you experience any problems with this product, you are covered by ACT warranty.
ENGLISH 2.0 Connections 2.1 Front • 1x USB-C female notebook connection (connect this port to the USB-C connector of your notebook • 1x USB-C 3.2 Gen1 female (5Gbps) • 1x USB-A 3.2 Gen1 female (5Gbps) • 1x 3.5mm jack headset female (headphone + mic) •...
ENGLISH 2.2 Rear • 1x DC power supply • 1x USB-C female PD Pass-through port (connect your USB-C charger to charge your notebook) • 2x HDMI 2.0 female port (connect your HDMI monitor) to this HDMI port • 1x DisplayPort female port(connect your DP monitor(s)) to these DP ports •...
ENGLISH 3.0 Connect the AC7047 Connect the plug of the power supply to the DC connector of the docking station and then connect the other end of the power supply into the wall outlet. Connect the supplied USB-C cable to the USB-C host connector on the docking station and the other end to the USB-C connector of your computer.
AC7047 will not be able to display video onto your Display(s). Please Note!!! For the AC7047 to be able to display the max resolution of 4K on all three monitors your PC/Notebook needs to support additionally DP1.4 and DSC please check the technical specs of your PC/Notebook if DSC and DP1.4 is...
If your notebook supports DP alt mode (DisplayPort alternate mode) it also supports MST. In this case the AC7047 will work as a USB-C to MST adapter. You will be able to use the multiple video outputs. The connected screens will be recognized as separate screens on your laptop / PC and can be used as an extended desktop.
PD profile to ensure a safe power delivery. For example, if you connect a 45.0W USB-C charger to the AC7047 (supports PD profiles up to 100.0W) and your notebook supports a USB-C PD profile of max.
A power socket is needed which should be close and easy accessible from the device. Repairing of the device should be done by qualified ACT staff. Never try to repair the device yourself. The warranty immediately voids when products have undergone self- repair and/or by misuse.
ACT warranty. Products are not covered by the ACT warranty when exposed to incorrect/improper use, external influences or when opening the service parts of the product by parties other than ACT. ACT may use refurbished materials for repair or replacement of your defective product. ACT cannot be held responsible for changes in network settings by internet providers.
Need help?
Do you have a question about the AC7047 and is the answer not in the manual?
Questions and answers