BIOSENCY Boraband BB100 Quick Start Manual

BB100 : Wrist-worn pulse oximeter
To guarantee the quality of measurements, the strap of the BORA Band
BB100 should be tight but comfortable.
5Start-up
Push the button located on
during 5 second s to indicate that the BORA Band is up and running.
green
5Check proper functioning
Perform a short push on the button. The indicator tuns green
seconds to confirm that the BORA Band is properly functioning.
5Switch-off
Ensure that your BORA Band has transmitted all acquired measurements
before switching it off.
To do so, ensure that your smartphone is connected to the Internet, and that
your BORA Band is in the vicinity of your smartphone.
Then, log on to your BORA Connect account and verify that your latest
measurements are displayed.
To switch off, push the button during 2 seconds. The LED indicator
cable into the micro
during 5 seconds and indicates that your BORA Band BB100 is switching off.
BB100 as
QUICK USER GUIDE
5
USB Port
1
Outer casing
4
LED indicator
3
Button
2
Strap
the side of the BORA Band. The indicator turns
2/ First step, plug one end of the micro USB
cable into the USB port of the AC adaptor
4/ Connect to AC
Figure 4 Adjust the wristband length
Enfiler le bracelet
6
3
Figure 5 Wearing the BORA Band
Vue du dessus
Figure 6 - Taking off the BORA Band
EN COURS
1
2/ Resserrer les deux scratchs pour que le br
1
7
5
Vue du dessous
EN COURS
Figure 3 Attach the watch band
Lorsque le bracelet est séparé du bo
2797
1
during 5
2
3
blinks