Avigilon OP-RKP-STND Manual

SMART KEYPAD READER
Some hardware may show the Openpath logo.
OP-RKP-STND OP-RKP-MULL
QuickStartGuide-OP-RKP-STND-MULL-Rev1
CONTENTS
OP-RKP-STND OP-RKP-MULL
1 x Standard Keypad Reader 1 x Mullion Keypad Reader
1x Surface mount bracket 2 x 6-32 1-½ " Screws
2 x 6-32 x ¾" Screws 2 x 1-¼" Self-tapping screws
2 x 8-32 x ½" Screws 2 x Plastic drywall inserts
2 x 1-¼" Self-tapping screws 1 x Avigilon DESFire EV3 card
2 x Plastic drywall inserts
1 x Avigilon DESFire EV3 card
1 - STANDARD KEYPAD READER
OP-RKP-STND can be flush mounted in a single gang box or
surface mounted using the provided surface mount bracket.
1. Install a recessed single
FLUSH MOUNT
gang box (d) into the wall.
2. Strip and connect the
wires.
3. Use the provided screws
(b) to attach the reader (c)
to the wall. Do not use
the provided surface
mount bracket for flush
mount installations.
4. Snap on the front cover
(a).
Note: Do not use adhesive.
SURFACE MOUNT EU single gang box: Use two
machine screws (not
included) in the top and
bottom holes.
2. Strip and connect the
wires.
3. Use the provided #8-32
screws ( b) to attach the
reader (c) to the surface
1. Attach the surface mount
mount bracket (e).
bracket (e) to the wall (f)
4. Snap on the front cover (a).
using one of these options:
Note: Do not use adhesive.
Drywall: Use wall anchors
and suitable screws. UK
single gang box: Use four
machine screws (not incl).
2 - MULLION KEYPAD READER
OP-RKP-MULL can be surface mounted where space is limited.
1. Strip and connect the wires.
2. If installing on a metal surface, drill
and tap to use the provided screws (b).
Or, use self-tapping screws. Attach the
reader (h) to the wall (i).
3. Snap on the front cover (g).
Note: Do not use adhesive.