1. Manuals
  2. Brands
  3. Medialine Manuals
  4. LCD TV
  5. M37LS
  6. User manual

Medialine M37LS User Manual

37"/42" wide lcd tv
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M37LS and is the answer not in the manual?

Questions and answers

Related Manuals for Medialine M37LS

Summary of Contents for Medialine M37LS

  • Page 2 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this TV near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
  • Page 3 Important Safety Instruction Shock Hazard Marking and Associated Graphic Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Explanation of Safety Related Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
  • Page 4 Important Safety Instruction General safety precautions Never touch the power plug with wet hands. An electric shock may occur. Don’t plug more than one appliance into the same power outlet. An electric shock or fire may occur. Insert the plug fully so that the power supply unit is connected securely.
  • Page 5 Important Safety Instruction Position the outdoor antenna line in such a way as to prevent rain water flowing into the parts indoors. A fire or electric shock may be caused if rainwater is allowed to get into the LCD display. Never disassemble and repair this TV yourself ;...
  • Page 6 Important Safety Instruction If installing or moving the LCD TV after opening the LCD TV box, ensure that two persons hold each side of the unit for moving it to the installation site. This is to avoid potential hazards to the LCD TV as well as to the people moving the unit.
  • Page 7 This User Manual contains proprietary information that is protected by copyright. All rights are reserved. No part of this User Manual may be reproduced, photocopied, transcribed, translated or transmitted in whatsoever form without the prior permission of the manufacturer. The size and appearance of this LCD display may be changed without notice for the purpose of improvement.
  • Page 8 After opening the box, make sure the following items are provided with the monitor. If you find that any of these items are missing or appear to be damaged, contact your dealer immediately. LCD TV Main Unit 37 LCD TV 42 LCD TV Standard Items User’s Manual...
  • Page 9 LCD TV Overview and Installation 1.1 Product Characteristics 1.2 LCD Display Overview Front View Rear View Cradle Installation Speaker Installation 1.3 Remote Controller Before Using the Remote Control Remote Controller Button Functions 1.4 Connecting the LCD TV and Peripheral Devices Connecting the Aerial or Cable Television Network Connecting VCR Connecting a DVD Player &...
  • Page 10 CONTENTS 2.3 To configure the menu Menu Settings TV Menu Categories and Items 2.4 To Configure TV Channels Setting Channels Automatically Storing the Channel Manually 2.5 To Select TV/External Input Selecting an External Input Device Connected to the LCD TV for viewing Selecting External Input Device When Playing PIP/POP/PBP 2.6 Adjusting the Picture...

  • Page 11: Table Of Contents

    CONTENTS PC Mode Environment Settings 3.1 Initial PC Mode Settings 3.2 PC Menu Components 3.3 Main Menu Settings PICTURE Menu Settings SCREEN Menu Settings Appendix A.1 Appendix Specifications Dispaly Modes Check before calling for service Troubleshooting...
  • Page 12 Product Characteristics LCD Display Overview Remote Control Connecting the LCD TV and Peripheral Devices...
  • Page 13 This product is equipped with an LCD panel to provide high-resolution PC mode. It is a 37"/42" LCD display that allows you to watch two high-resolution video sources simultaneously. Automatic Power On/Off You can preset the power on/off time to have it turned on and off automatically as desired. It is automatically turned off if there is no input signal for 15 minutes.
  • Page 14 LCD TV Overview and Installation Various Picture/Sound Controls Allows you to set the picture and sound settings for a number of different types of program and viewing and listening conditions. Supports SSM (Sound Status Memory) and PSM (Picture Status Memory), facilitating optimum sound settings for different video modes (TV drama, music, movie, and so on).
  • Page 15 Front View LCD Display Displays the current contents of the display. MENU Button Displays the main OSD menu. Exits from a sub-menu. SOURCE Button Displays a menu of all of the available input sources. (TV, AV 1, 2, 3, Component, DVI and RGB) LCD Display Overview...

  • Page 16: External Speakers

    LCD TV Overview and Installation Channel ( / ) Buttons Press CH ( ) or CH ( ) to change channels. Also used to select the OSD (On Screen Display) menu. Volume ( / ) Buttons Press the VOL (decrease) or VOL (increase) to change the volume.
  • Page 17 LCD TV Overview and Installation Rear View Head Phone Jack Connects with a headphone. AV3 : S-VIDEO (AV) S-Video signal from an S-VHS VCR or Laserdisc player. AV3 : Composite - Composite Video IN : Connect with the Video input terminal from a VCR (or DVD Player). - Audio L/R IN : Connect with the Audio-Left/Right from a VCR (or DVD Player).
  • Page 18 LCD TV Overview and Installation DVI-D Connects the DVI cable to the DVI connector on the computer. ANALOG RGB Connects the VGA signal cable to the VGA connector on the computer. PC AUDIO INPUT Connect to the audio-output port of a PC. RS-232C This is used for connecting a serial cable.
  • Page 19 LCD TV Overview and Installation Cradle Installation Place the cradle on a wide, stable, and flat surface. If the cradle has not been assembled, assemble it as illustrated in the diagram. N O T E If installing the LCD panel on the cradle, install the LCD panel before attaching the speakers. Lower the LCD panel in the direction of the arrow.
  • Page 20 LCD TV Overview and Installation Secure the LCD TV with screws. Speaker Installation Attach the latch to the speaker, and secure it with screws. Attach the speaker to the LCD TV, and secure it with screws. LCD Display Overview...
  • Page 21 LCD TV Overview and Installation Connect the speaker audio cable to the LCD TV. 1-10 LCD Display Overview...
  • Page 22 LCD TV Overview and Installation 1-11 LCD Display Overview...
  • Page 23 Before Using the Remote Control Inserting the batteries in the Remote Control You must insert or replace the batteries in the remote control. Open the cover. Insert batteries with the correct polarity (+, -). Close the cover. N O T E Always use recommended batteries only;...
  • Page 24 LCD TV Overview and Installation Information on the Use of the Remote Control When using the remote control, point it towards the Power Indication Lamp of the LCD Display. The operating distance should be within 23 feet. The receiving angle should be within 30 degrees. N O T E Do not subject the remote control to shock.
  • Page 25 LCD TV Overview and Installation Remote Control Button Functions POWER Button Turns the display On or Off. NUMBER Buttons Direct channel select. Direct page selection during Teletext display. 1-14 Remote Control...

  • Page 26: Menu Button

    LCD TV Overview and Installation ‘ ’ Button Set a channel on the digital TV. PSM (Picture Status Memory) Button Recalls your preferred picture setting. (Dynamic, Standard, Game, Mild, User) N O T E PC Mode(CSM) : Warm, Normal, Cool, User SSM (Sound Status Memory) Button Recalls your preferred sound setting.
  • Page 27 LCD TV Overview and Installation <Zoom 2> <4:3> P.INPUT Button Changes the PIP input source. PIP Button Changes the screen size. PIP(Small), PIP(Large), POP, PBP1, PBP2 screen change. (Small) PIP(Large) PBP1 PBP2 CAPTION Button Controls the caption decoder. P.POSITION Button Changes the PIP sub-window to 4 different corner locations.
  • Page 28 LCD TV Overview and Installation Buttons Press CH or CH to change channels. Also used to select in the OSD menu or select the channel providing teletext service. MUTE Button Press to temporarily cut off the sound. MTS Button Press to choose stereo, mono or Separate Audio Program (SAP broadcast). EPG(Electronic Program Guide) Button View a program guide for the digital TV.
  • Page 29 Connecting the Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of following sources: An outdoor aerial An indoor aerial (not recommended) A cable television network When connecting an outdoor antenna Antenna connection is the most important factor for obtaining clean and sharp video quality.
  • Page 30 LCD TV Overview and Installation N O T E Connecting 300 feeder cable to the antenna converter Remove the insulation from Use the driver to Connect the 300 feeder the 300 feeder cable. loosen the screw. cable, and secure it by retightening the screw with the screwdriver.
  • Page 31 LCD TV Overview and Installation Connecting VCR When connecting to the composite connector Different jacks on the rear panel are used for different external devices. Method 1 Composite Audio/Video cable (Optional) Method 2 Composite Audio/Video cable (Optional) N O T E S-video and composite video signals share the audio signals.
  • Page 32 LCD TV Overview and Installation When connecting to the S-video connector Different jacks on the rear panel are used for different external devices. Method 1 Audio cable (Optional) S-Video cable (Optional) Method 2 Audio cable (Optional) S-Video cable (Optional) 1-21 Connecting the LCD TV and Peripheral Devices...
  • Page 33 LCD TV Overview and Installation N O T E Connecting VCR (when connecting to the antenna input connector) Different jacks on the rear panel are used for different external devices. Connect the external antenna cable to the VCR. Connect the 75 coaxial cable to the VCR and TV.
  • Page 34 LCD TV Overview and Installation Set top Audio cable (Optional) Component cable (Optional) N O T E For an explanation of Component video, see your DVD Player's manual. When connecting the DVD player or set top box, connect the component cable to the Component jack.
  • Page 35 LCD TV Overview and Installation Connecting to a digital (AC3) amplifier "Digital" refers to surround sound technology for movie theatres used for the latest movies and it can be used at home to obtain realistic sound effects. You can enjoy realistic sound effects from a movie or live concert DVD disc by connecting the product to a 6-channel amplifier with a digital converter or digital (AC3) processor.
  • Page 36 LCD TV Overview and Installation Connecting an External TV The video output of this LCD TV can be transmitted to other external TVs. Connect the audio/video cables to the video output jack on the LCD TV. Connect the other end of the audio/video cables to the video input jack on the external TV. Turn on the LCD TV power, and then turn on the external TV power.
  • Page 37 LCD TV Overview and Installation Connecting to a PC When used as a monitor, this LCD TV supports resolutions of 1600x1200 @ 60Hz (UXGA) / 1280x1024 @ 85Hz (SXGA). For best performance, please select 1280x768 @ 60Hz / 1360x768 @ 60Hz (WXGA). Turn off your PC and LCD TV.
  • Page 38 LCD TV Overview and Installation Speaker (optional) Headphone (optional) Audio cable (optional) VGA cable Speaker (optional) Headphone (optional) Audio cable (optional) DVI cable 1-27 Connecting the LCD TV and Peripheral Devices...
  • Page 39 Watching TV Watching Digital TV To configure the menu To Configure TV Channels To Select TV/External Input Adjusting the Picture Adjusting the Sound Configuring the PIP/POP/PBP Functions To Configure the SET UP External Control Device Setup...
  • Page 40 Check the antenna connection. (For more information on connection, see section ‘1.4 Connecting the LCD TV and Peripheral Devices’.) Press the power button on the rear panel of the LCD TV. Press the <POWER> button on the remote control. Press the <TV/AV> button on the remote control, and press the number button to select a channel (For example, if selecting channel no.
  • Page 41 Using the LCD TV N O T E To mute the LCD TV sound Press the <MUTE> button on the remote control once to mute the LCD TV sound. Press the button once again to turn the sound back To completely turn off the LCD TV power. Press the <POWER>...
  • Page 42 To view information on the current channel Press the < > button. The information on the current channel will be displayed on the screen. Watching Digital TV...
  • Page 43 Using the LCD TV To view program guide for the digital TV Press the < > button. Pressing this button while watching the TV displays a program guide for the currently selected channel. N O T E Press the EPG button again to clear the program guide. Watching Digital TV...
  • Page 44 To configure the LCD TV functions, press the [MENU] button. Knowing the method for configuring the menu will make using the LCD TV much easier. Menu Settings Press the power button on the rear panel of the LCD TV, and press the <POWER> button on the remote control.
  • Page 45 Using the LCD TV Press the <OK> button or the < > button on the remote control to select the menu to configure. Submenus will be available for each selection. In the submenus, use the < > button on the remote control to navigate to different items.
  • Page 46 Using the LCD TV Use the < > button and the < > button on the remote control to adjust the settings for different items. (For example, adjustment can be made of items such as Brightness, Contrast, Color, Sharpness, and Tint.) When adjustments are complete, press the <OK>...
  • Page 47 Using the LCD TV TV Menu Categories and Items The Main Menu contains 5 categories, which in turn contain submenus and option items: Main Menu Sub Menu 1 Sub Menu 2 Sub Menu 3 PICTURE 16:9, 14:9, Zoom 1, Screen Aspect Selection Zoom 2, 4:3 OverScan Magnifies the size of the Picture on screen.

  • Page 48: Main Menu

    Using the LCD TV Main Menu Sub Menu 1 Sub Menu 2 Sub Menu 3 Description PIP/POP/PBP On/Off PIP/POP/PBP Function Off. Source Component, RGB, DVI Swap To Set PIP Size Small, Large PIP Position PIP Screen Position Selection. Source Component, RGB, DVI Swap To Set PBP1~2...

  • Page 49: Sub Menu 1

    Using the LCD TV Main Menu Sub Menu 1 Sub Menu 2 Sub Menu 3 Description Bg Opacity Solid, Flash, Translucent, Transparent Edge Type None, Raised, Depressed, Uniform, Left Shadow, Right Shadow Edge Color White, Black, Red, Green, Blue, Yellow, Magenta, Cyan Analog Caption CC1~4 Closed Captioning function support.
  • Page 50 To watch TV with the LCD TV, configure the channels. (Always check the TV connection before use.) To save TV channels, configure the channels during the broadcasting hours. Use Automatic Channel Scanning to save all the channels currently airing. Setting Channels Automatically Press the <MENU>...
  • Page 51 Using the LCD TV Press the < > button on the remote control to move to the ‘Channel scan’ submenu. At the ‘Channel scan’ item, press the < > button on the remote control to run ‘To Start’. Channels will be scanned and saved automatically. Press the <MENU>...
  • Page 52 Using the LCD TV Press the < > button on the remote control to move to the ‘Channel Edit’ submenu, and press the < > button to select the channel with the best video quality from the channels found. Press the < >...
  • Page 53 Using the LCD TV 2-15 To Configure TV Channels...
  • Page 54 An external input signal connected to the LCD TV can be selected for viewing. (VCR, DVD, Camcorder, etc.) Selecting an External Input Device Connected to the LCD TV for viewing Press the <SOURCE> button on the remote control. The ‘MAIN SOURCE’ screen will be displayed. Press the <...
  • Page 55 Using the LCD TV Press the <MENU> button on the remote control. Press the < > button on the remote control to navigate to the ‘PIP/POP/PBP’ menu, and press the < > button to navigate to the ‘On/Off’ submenu. Press the < >...
  • Page 56 Using the LCD TV Using POP Mode LCD TV Screen Using PBP1 Mode LCD TV Screen Using PBP2 Mode LCD TV Screen 2-18 To Select TV/External Input...
  • Page 57 Using the LCD TV When option configuration for each item is complete, press the <OK> button on the remote control. To swap between the main screen and the sub-screen when in PIP, POP, or PBP mode, press the <SWAP> button on the remote control. 2-19 To Select TV/External Input...
  • Page 58 Selecting Screen ARC Press the <MENU> button on the remote control. Press the < > button on the remote control to navigate to the ‘ARC’ submenu. Press the < > button on the remote control to select Screen Aspect. When selection is complete, press the <OK>...
  • Page 59 Using the LCD TV When configuration is complete, press the <MENU> button to close the ‘Menu’ screen. Magnifies the screen size Press the <MENU> button on the remote control. Press the <OK> button on the remote control to navigate to the ‘PICTURE’ menu. Press the <...
  • Page 60 Using the LCD TV - Normal : Plain White - Cool : Bluish White - Warm 1~2 : Reddish White When Selection is complete, press the <OK> button on the remote control, and press the <MENU> button on the remote control once again to close the ‘Menu’ screen. N O T E To configure the menu without the remote control Press the <MENU>...

  • Page 61: Contrast : Adjust Contrast

    Using the LCD TV PSM (Picture Standard Mode) provides the following functions: Standard : Standard Picture Appearance Mild : Softer Picture Appearance Game : Select this when playing video games on LCD TV. Dynamic : Vivid Picture Appearance User : Available user setting items are Brightness, Contrast, Color, Sharpness, Tint, etc. - Brightness : Adjust brightness.
  • Page 62 Press the <MENU> button on the remote control. Press the < > button on the remote control to navigate to the ‘SOUND’ menu. Press the < > on the remote control to go to the ‘AUDIO LANGUAGE’sub menu. Press the < >...
  • Page 63 Using the LCD TV Press the < > button on the remote control to navigate to the ‘SSM’ submenu. Press the < > button on the remote control to select the options provided in ‘SSM’. When configuration is complete, press the <OK> button. Flat : Standard factory settings.
  • Page 64 Using the LCD TV Press the < > button on the remote control to navigate to the ‘AVL’ submenu. Press the < > button on the remote control to select whether to use the ‘AVL’ function. When selection is complete, press the <OK> button. (The volume level fluctuates from station to station when changing channels.
  • Page 65 Using the LCD TV Press the < > button on the remote control to navigate to the ‘Balance’ submenu. Press the < > button on the remote control to adjust ‘Left and Right Speaker Sound Balance’. When adjustment is complete, press the <OK> button. When configuration is complete, press the <MENU>...
  • Page 66 Two channels can be shown on the TV screen simultaneously. Available screen division methods are PIP (Picture in a Picture), POP (Picture on a Picture), and PBP (Picture by a Picture). N O T E The PIP/POP/PBP modes are divided into two groups: - Group A: Component, RGB, DVI - Group B: TV, AV1, AV2, AV3 If Group A is selected for the main screen, it cannot be selected for the sub screen.
  • Page 67 Using the LCD TV Swap : Swap between the main screen and the sub-screen (To Set). PIP Size : Select the PIP screen size (Small or Large). PIP Position : Select the PIP screen position. When configuration is complete, press the <MENU> button to close the ‘Menu’ screen. POP Function Settings Press the <MENU>...
  • Page 68 Using the LCD TV PBP Function Settings Press the <MENU> button on the remote control. Press the < > button on the remote control to navigate to the ‘PIP/POP/PBP’ menu. Press the < > button on the remote control to navigate to the ‘On/Off’ submenu. Press the <...
  • Page 69 Using the LCD TV 2-31 Configuring the PIP/POP/PBP Functions...
  • Page 70 Various functions for watching TV can be configured. (Language, Transparency, ISM Method, Timer, Caption, Parental etc.) Selecting the Main Screen Language Press the <MENU> button on the remote control. Press the < > button on the remote control to navigate to the ‘SET UP’ menu. Press the <...
  • Page 71 Using the LCD TV Adjusting Image Transparency Press the <MENU> button on the remote control. Press the < > button on the remote control to navigate to the ‘SET UP’ menu. Press the < > button on the remote control to navigate to the ‘Transparency’ submenu.
  • Page 72 Using the LCD TV Setting Sleep Timer Set the sleep timer to switch the TV power to the standby mode automatically when a specified time has elapsed. N O T E Press the <SLEEP TIMER> button on the remote control to set the sleep timer. Press the <MENU>...
  • Page 73 Using the LCD TV In ‘Off Timer’, press the < > button and the < > button on the remote control to set the ‘TV Off’ timer. (When setting time, press the < > button on the remote control to set ‘Hour’, press the <...
  • Page 74 Using the LCD TV Press the < > button on the remote control to navigate to the ‘Caption’ submenu. Press the < > buttons on the remote control. Press the < > buttons to move to ‘Analog Caption’. And the press the <VOL / VOL> buttons to select ‘CC1~4’...
  • Page 75 Using the LCD TV When you have finished, press the <MENU> button to close the ‘Menu’ screen. N O T E Different Channel and Field display different information : Field 2 carries additional information that supplements the information in Field 1.(for example, Channel 1 may have subtitles in English, while Channel 2 has subtitles in Spanish.) Using the Parental The Parental feature automatically locks out programming that is deemed inappropriate...
  • Page 76 Using the LCD TV Press the < > button. The ‘Enter the Password : ’ screen is displayed. Enter 4-digit PIN number. N O T E The default PIN number for a new set is ‘1-1-1-1’. After entering a valid PIN number, the ‘Parental’ menu screen will appear. Press the <...
  • Page 77 Using the LCD TV How to On/Off the Parental Press the <MENU> button on the remote control. Press the < > button on the remote control to navigate to the ‘SET UP’ menu. Press the < > button on the remote control to navigate to the ‘Parental’ submenu. Press the <...
  • Page 78 Using the LCD TV When you have finished, press the <MENU> button to close the ‘Menu’ screen. How to Setup Restriction Using the MPAA Press the <MENU> button on the remote control. Press the < > button on the remote control to navigate to the ‘SET UP’ menu. Press the <...
  • Page 79 Using the LCD TV Press the < > buttons to select particular MPAA category. The < > buttons will cycle through the MPAA categories. MPAA G & Above General audience (no restrictions). PG & Above Parental guidance suggested. PG-13 & Above Parents strongly cautioned.
  • Page 80 Using the LCD TV How to Setup Restriction Using the TV Guidelines Press the <MENU> button on the remote control. Press the < > button on the remote control to navigate to the ‘SET UP’ menu. Press the < > button on the remote control to navigate to the ‘Parental’ submenu. Press the <...
  • Page 81 Using the LCD TV Press the < > buttons to move to one of the six age-based categories in column and press the < > buttons will cycle through the MPAA categories. For example, if you block TV-Y category, then TV-Y7 will be automatically blocked. Similarly, if you block TV-G &...
  • Page 82 Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the Monitor’s functions externally. Connect the serial port of the control device to the RS-232C jack on the Monitor back panel. RS-232C connection cables are not supplied with the Monitor.
  • Page 83 Using the LCD TV N O T E RS-232C Configurations 7-Wire Configuration 3-Wire Configuration (Standard RS-232C cable) (Not standard) Set ID - Use this function to specify a monitor ID number. - Refer to ‘Real Data Mapping 1’. Press the <MENU> button and then use the button to select the SPECIAL menu.
  • Page 84 Using the LCD TV Command Reference List COMMAND 1 COMMAND 2 DATA(Hexadecimal) Power 0 ~ 1 Input Select 0 ~ 7 Volume Mute 0 ~ 1 Volume Control 0 ~ 64 Contrast 0 ~ 64 Brightness 0 ~ 64 Color 0 ~ 64 Tint 0 ~ 64...
  • Page 85 Using the LCD TV N O T E Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : k, [Command 2] : To control LCD set. [Set ID] : You can adjust the Set ID to choose desired monitor ID number in Special menu. Adjustment range is 0 ~ 99.

  • Page 86: Input Select

    Using the LCD TV To show Power On/Off. - Transmission [k][a][ ][Set ID][ ][FF][Cr] Data 0 : Power Off 1 : Power On - Acknowledgement [a][ ][Set ID][ ][OK][Data][x] In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.

  • Page 87: Volume Control

    Using the LCD TV Volume Control (Command2 : f) To adjust volume. You can also adjust volume with the volume buttons on remote control. - Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 Refer to ‘Real data mapping1’ as shown below. - Acknowledgement [f][ ][Set ID][ ][OK][Data][x] Contrast (Command2 : g)
  • Page 88 Using the LCD TV Color (Command2 : i) To adjust the screen color. You can also adjust color in the Video menu. - Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 Refer to ‘Real data mapping 1’. - Acknowledgement [i][ ][Set ID][ ][OK][Data][x] Tint (Command2 : j)

  • Page 89: Pip/Pop/Pbp

    Using the LCD TV PIP/POP/PBP (Command2 : n) To control the PIP (Picture-in-Picture) or Twin Picture. You can also control the PIP/Twin picture mode using the PIP or TWIN PICTURE button on the remote control or in the Twin menu. - Transmission [k][n][ ][Set ID][ ][Data][Cr] Data...

  • Page 90: Color Temperature

    Using the LCD TV Bass (Command2 : s) To adjust bass. You can also adjust bass in the Audio menu. - Transmission [k][s][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 Refer to ‘Real data mapping 1’. - Acknowledgement [s][ ][Set ID][ ][OK][Data][x] (Operates only when SSM is set to USER.) Balance (Command2 : t)

  • Page 91: Av And Hd H Position

    Using the LCD TV AV and HD H Position (Command2 : v) To adjust AV and HD mode H Posion - Transmission [k][v][ ][Set ID][ ][Data][Cr] Data 0 ~ 64 - Acknowledgement [v][ ][Set ID][ ][OK][Data][x] AV and HD V Position (Command2 : w) To adjust AV and HD mode V Posion - Transmission [k][w][ ][Set ID][ ][Data][Cr]...

  • Page 92: Initial Pc Mode Settings

    Initial PC Mode Settings PC Menu Components Main Menu Settings...
  • Page 93 To use the PC mode, set the resolution on the PC to 1280 x 768 @ 60Hz / 1360 x 768 @ 60Hz, and connect it to the LCD TV (supports up to 1600 x 1200 @ 60Hz/1280 x 1024 @ 85Hz). Connect the LCD TV and the PC, and press the <POWER>...
  • Page 94 PC Mode Environment Settings Initial PC Mode Settings...

  • Page 95: Ssm Music Movie Speech User

    The Main menu has 5 categories, which contain submenus and option items. Switch to the ‘PC’ mode and press the <MENU> button on the remote control. The ‘MAIN MENU’ screen will be displayed. Main Menu Sub Menu 1 Sub Menu 2 Sub Menu 3 Description PICTURE 16:9, 4:3...
  • Page 96 PC Mode Environment Settings Main Menu Sub Menu 1 Sub Menu 2 Sub Menu 3 Description SET UP Language English, Deutsch, Français, Español, Italiano, Korean (Menu Screen Display Language Selection.) Transparency 0~10 Adjusts the image transparency. ISM Method Normal Normal screen Orbit Moves the screen up, down, left and right in small increments to prevent overheating of the...
  • Page 97 PC Mode Environment Settings Main Menu Sub Menu 1 Sub Menu 2 Sub Menu 3 Description SCREEN Auto-Configure To Start Automatic adjustment of the screen/Auto in pogress. H-Position 0~100 Horizontal screen position adjustment. V-Position 0~100 Vertical screen position adjustment. Clock 0~100 Picture quality adjustment by fine-tuning.
  • Page 98 PC Mode Environment Settings PC Menu Components...

  • Page 99: Picture Menu Settings

    PICTURE Menu Settings Switch to the ‘PC’ mode, press the <MENU> button on the remote control, and then press the <OK> button on the remote control. Press the <OK> button or the < > button on the remote control. The menu will be selected, and the submenus can be navigated.
  • Page 100 PC Mode Environment Settings When selection is complete, press the <OK> button on the remote control. Press the < > button on the remote control to navigate to the ‘Brightness, Contrast’ submenu in order to adjust brightness and contrast. When adjustment is complete, press the <OK> button on the remote control, and press the <MENU>...

  • Page 101: Screen Menu Settings

    PC Mode Environment Settings SCREEN Menu Settings Switch to the ‘PC’ mode, press the <MENU> button on the remote control, and then press the < > button on the remote control to navigate to the ‘SCREEN’ menu. Press the < >...
  • Page 102 PC Mode Environment Settings Press the < > button and the < > button on the remote control to adjust the submenus ‘H-Position’, ‘V-Position’, ‘Clock’, ‘Phase’, etc. H-Position : Adjusts horizontal screen position. V-Position : Adjusts vertical screen position. Clock : Adjusts the picture quality by fine tuning the screen. Phase : Adjusts the screen phase (adjustment for screen noise, focus when letters appear to overlap each other, brightness, stability, etc.).

  • Page 103: Appendix

    Appendix...

  • Page 104: Specifications

    Specifications Panel Panel Type 37 Wide TFT Colour LCD Display Area 819.6 mm 460.8 mm (37.02 inch(940.3 mm) diagonal) Display Color (8bit) 16.7 million Pixel Pitch 0.2 mm 0.6 mm RGB Recommended Resolution 1366 768 Contrast Ratio 600 (typical) Luminance white 500 cd/m (Center 1 point Typ.) Viewing Angle...
  • Page 105 Appendix Screen Control True Colour On Screen Display Menu, Bit Map Remote Controller Dimension 1086(W) 304(D) 640(H)mm : (Speaker, Stand) included 42.75(W) 11.96(D) 25.19(H)inch Weight Net 29.7kg/65.47pounds Gross 36.6kg/80.68pounds Panel Panel Type 42 Wide TFT Colour LCD Display Area 930.25 mm 523.01 mm (42.02 inch (1067.308 mm) diagonal) Display Color 16.7 million, 8 bit Pixel Pitch...
  • Page 106 Speaker 10 watts Size 19(W) 11.5(D) 68(H)cm 7.48(W) 4.52(D) 26.77(H)inch Weight 2.5kg/5.5pounds(gross) Plug & Play DDC 1/2 B Screen Control True Colour On Screen Display Menu, Bit Map Remote Controller Dimension 1221(W) 304(D) 731(H)mm : (Speaker, Stand) included 48.07(W) 11.96(D) 28.77(H)inch Weight Net 33.0kg/72.75pounds Gross 41.5kg/91.49pounds...
  • Page 107 Display Modes If the signal from the system is equal to the standard signal mode, the TV is adjusted automatically. If the signal from the system does not equal the standard signal mode, adjust the mode by referring to the Video card user guide, because the TV might not display or the power LED only might be on.
  • Page 108 Appendix Check before calling for service Please check the following before asking the service center about any problems with your LCD TV. Something seems to be wrong with the TV Symptoms What to do The TV does not turn on. Check the power cable connection and press the <POWER>...
  • Page 109 Appendix Symptoms What to do The picture shakes, lines appear, and Check whether the TV signal is receiving audio is unstable. interference from other radio waves or devices. Check whether the TV signal is receiving interference from automobiles, high- voltage cables, airplanes, neon signboards and so on.
  • Page 110 Appendix Symptoms What to do When playing a DVD, there is no video. Check the video cable connection between the DVD and TV. Check whether there is a problem with the DVD title. Check whether the external input signal matches the DVD output signal. When playing VCR, there is noise on the Use the screen adjustment button on the screen.
  • Page 111 Appendix Troubleshooting If you have a problem setting up or using your LCD TV, you may be able to solve it yourself. Before contacting customer service, try the suggested actions that are appropriate to your problem. What you see... Suggested Actions Reference ‘No Signal’...

This manual is also suitable for:

M42ls

Table of Contents