Inspections Product elements Changing the Elastic Energy Storages System components Cleaning the LiftSuit Technical specifications Multiple Users for one LiftSuit Safety instructions Disposal Important safety information Legal Information What to do in case of an emergency and exceptional situations Liability...
Thank you for purchasing the LiftSuit. The purpose of this document is to make you familiar with Before you start using the LiftSuit yourself, or before you hand it out to be used in your company, the installation and use of the LiftSuit, so that you can safely operate it. This documentation we advise you to take the time and read the following sections of this handbook carefully.
To improve our customer experience, we appreciate your comments. They can be submitted on Please review all safety signs which are placed on relevant parts of the LiftSuit to indicate the support page of our website or sent to info@auxivo.com.
B. The Elastic Energy Storages (EES) on your back that store your movement energy that is used to support you when working. The LiftSuit is not a medical device. The LiftSuit is not intended to be used for any kind of C. The hip belt that secures the LiftSuit around your waist.
0.9 kg (S/M) / 1.0 kg (L/XL) fall protection before work. • Make sure to use the correct size and that the LiftSuit is adjusted properly before every Chest circumference 72 - 94 cm (S/M) / 87 - 115 cm (L/XL) use.
• Follow your emergency plan. • Get your emergency kit. For questions or more information on how to use the LiftSuit safely in your company please contact your supplier or Auxivo AG. Make sure the black-white patterned side of the Check that the lower EES connecting straps cross elastics are facing you.
Then tighten the vest in the middle. Adjusting the lower EES connecting straps Objective: Adjusting the LiftSuit to your size to achieve an ideal fit and the best support effect with maximum comfort for the back. For effective activation, both lower EES connecting strap lengths must be adjusted to fit your body height.
Checking and adjusting for an optimal fit Make sure that you activate the LiftSuit when you want to receive hip and back support. The LiftSuit Objective: To wear the LiftSuit with an optimal fit, the best support effect, and maximum comfort.
Storages (EES) manufactured by Auxivo AG. Elastic Energy Storage (EES) Always remove the EES when washing or cleaning the LiftSuit. It is possible to swap the EES with Check for signs of abrasion or damage on front and back side of the EES.
• Reattach back EES according to section Changing the back Elastic Energy Storages. Detaching the back EES After assembly inspect to ensure that all parts of the LiftSuit are correctly assembled for the next use, as described in section Checking the LiftSuit.
LiftSuit. This warranty shall be applicable only if the customer has inspected the LiftSuit and a claim pursuant to this warranty is made in writing to the supplier or Auxivo AG within 14 days after delivery stating the serial number of the defective LiftSuit, the date such LiftSuit was delivered and a description of the defect.
8603 Schwerzenbach Pair of Elastic Energy Storage (EES) Back-EES-Blue Switzerland Product Identification Passive occupational exoskeleton „LiftSuit“ The product described above, as presented, complies with the provisions of the following directives: 2006/42/EG Machinery Directive Conformity with the directives is ensured by applying the following harmonized standards:...
Need help?
Do you have a question about the LiftSuit and is the answer not in the manual?
Questions and answers