Tsun DCU1000 Quick Installation Manual

Quick Installation Guide
DCU1000
Read Me First
①
②
①:PV Input
③
②:DC Output
③:WIFI
④:Power Button
④
DCU1000 Packing List
DCU1000 PV Connecting Cable
Input
Microinverter
Quick Guide
"Y"Connecting Cable
Balcony Storage System Installation
Installation
1
Unscrew the caps of both
connectors on DCU1000
counterclockwise.
Note: if you have two or more DCU1000(Max 5 units) and want to
stack DCU1000 on each other, please refer to below 2 pictures.
Ⅰ
Ⅱ
Microinverter Cable
Output
2
Power off all DCU1000 in
the same system before
disconnecting DCU1000
any from other units.
blue connector
black connector
for input port
for output port
3
Note：
Please do not expose the device to direct sunlight, rain, or snow,
and ensure that it is kept in well-ventilated conditions.
√
×
Power LED status：
Press and hold the Power button for
about 2s, and then release to power
on DCU 1000 .
POWER WIFI
1. Power on, self-test: blinking;
2. No charging and discharging:
steady on;
3. With charging ,no discharging: 3s
on, 1s off;
4.With discharging, no charging: 1s
on, 3s off;
5.With charging and discharging: 1s
on, 1s off.