Install the heating system piping ............................ 23 Mount the drainpipe ................................24 6.10 Install a filling loop ................................. 24 6.11 Install the Aira Outdoor unit .............................. 25 6.12 Fill the system ..................................25 Electrical installation ............................26 Wiring overview ..................................26 Electrical box overview ................................
Page 3
Commission Aira Room Thermostats ..........................36 Get the customer started ..............................36 Service & Maintenance ............................37 Maintenance .................................... 37 Alerts in the Aira app ................................37 Service & Repairs ................................... 38 Spare parts ....................................38 End of use ................................39...
Welcome to your heat pump system Congratulations on switching to clean, green home costs and produce less CO than a traditional heating. Your Aira heat pump will cut your energy heating system using oil or gas. A+++ Aira Intelligence The highest possible energy class rating Ultra-connected &...
Aira customer support. • The hot water cylinders used together with Aira 2.2 Regulations to be observed Indoor Unit Compact could be heavy and require appropriate lifting and transportation •...
Aira. supply and protect the surroundings that could be • No modifications of the products and/or damaged by the leaked water and contact Aira accessories are allowed. The manufacturer is customer support immediately. not responsible for any alterations or modifications that are made without explicit, written approval.
The heating can be extracts energy from the outside air to heat your controlled and personalised in Aira’s easy-to-use home and water. The system comes with Aira app and easily accessed with Aira’s Room Intelligence and becomes more and more Thermostat.
250L 300L 3.1 Aira Intelligence 3.2 System interaction Aira products work together to create an intelligent The main point of interaction with the heating ecosystem. It is a self-regulating system that system is through the Aira app. The temperature learns each home’s unique properties and...
Error – check your app A pulsating red light for more info 3.3 Connectivity interfaces Note: The Aira Home Energy app is subject to 3.3.1 Connection between the heat pump change. Visuals and features may be updated to system and the internet enhance user experience and functionality.
Aira’s Privacy cable to maximize the speed of the connection. Policy. Historical data for discontinued devices may be used to improve the Aira algorithms, but only in 2. Wi-Fi anonymised form. The Wi-fi 6 standard is supported on 2.4GHz and 5.0 GHz networks.
A can support in case of service of the outdoor unit. buffer tank is always used in an Aira installation to increase system reliability, increase the hot water volume, reduce knocking noise due to temperature...
39°C. the ambient outdoor temperature is outside the optimal working temperature. The Aira Technician will set the temperature of the hot water based on the household’s needs. The The graph below show the maximum flow user can then adjust the target temperature of the temperature in the heating system and the water in the Aira app if needed. The new target-...
Aira’s Clean several ways to combine the product dimensions in Energy Expert home visits. The system the Aira heat pump product range to get the best dimensioning is mainly determined by size of the solution for each home.
Page 14
AIRA INDOOR UNIT COMPACT ½ B) Two heating/cooling zones - one direct and one with mixing valve HEATING HEATING INDOOR HOT WATER BUFFER OUTDOOR ZONE 1 ZONE 2 UNIT CYLINDER TANK UNIT C) Two heating/cooling zones - both with mixing valve Symbols...
Page 15
AIRA INDOOR UNIT COMPACT ½ 4.1.2 Symbols...
5. PRODUCT INFORMATION Aira’s Indoor Unit Compact is simple, clean, and effortlessly stylish with its Scandi design. It is the smallest indoor unit in Aira’s product range, developed for more space efficient installations. It contains the heating control system and the connectivity module that sends and receives data.
Aira Intelligence included Energy savings features Away mode, Smart Weather Mode & Insights for cost & CO2 savings Settings interfaces Aira app, Aira Room Thermostat & Intelligent Light Cues included Domestic hot water protection Legionella prevention program Immersion heater power...
AIRA INDOOR UNIT COMPACT ½ 5.5 Placement rules The placement of each unit is decided together with the customer when the system is designed. The rules for Aira Indoor Unit Compact are the following: • Aira Indoor Unit Compact is mounted on the wall.
Each system must be dimensioned individually. It is Note that the Aira Comfort Guarantee is only valid possible, though not recommended, to use a if appropriate heating volume through the radiators smaller diameter.
AIRA INDOOR UNIT COMPACT ½ PRESSURE RELIEF VALVE NON-RETURN VALVE WITH PRESSURE GAUGE WITH DRAINPIPE SHUT-OFF VALVE COLD-WATER SUPPLY FLOW METER PARTICLE FILTER 6.7.1 Install incoming water piping Shut-off valves It is recommended to add shut-off valves in components & connect the pipes...
6.8.1 Connect to the buffer tank Heating water volume guide Install the buffer tank according to the Aira Buffer Tank Installation Manual and fit shut-off valves on Type of heating system Water content per kW...
AIRA INDOOR UNIT COMPACT ½ Expansion vessel size Aira Buffer Tank 40L Aira Buffer Tank 100L Maximum height (m) Pre-pressure (bar) Maximum volume in heating circuit (including buffer tank) (L) 6.8.3 Install the heating system components and connect the piping Circulation pumps (P1 &...
6. Drainage 7. Central heating return 6.11 Install the Aira Outdoor unit Follow the installation instruction in the Aira Use non-flammable insulation foam to seal the gap Outdoor Unit Installation Manual to install the around the pipes coming out through the walls and outdoor unit and connect it to the indoor unit pipes.
It is also possible to connect tariff steering (SG Ready functionality) and energy consumption limiting DSO. Wired room temperature sensors can be installed if the wireless Aira Room Thermostats, for some reason, cannot be used. • The unit must be completely disconnected from...
AIRA INDOOR UNIT COMPACT ½ 7. Buffer tank temperature sensor (THC) 7.2 Electrical box overview 8. Circulation pump (P1) 9. Circulation pump (P2) 10. Mixing valve (MV2) 11. Flow temperature sensor (TV2) 12. Hot water cylinder temperature sensor (DHW) C) Two heating/cooling zones - both with...
AIRA INDOOR UNIT COMPACT ½ 7.4 Accessing the indoor unit electrical box 7.4.1 Remove the exterior covers from the Indoor Unit Compact Remove the middle screw holding the top front 2. Pull out the top front plate straight out. plate.
AIRA INDOOR UNIT COMPACT ½ 7.4.3 Remove the electrical box from the Indoor Unit Compact Remove the four screws holding the middle Remove the screw holding the electrical box. plate. Open the electrical box. Pull out the inner plate. 7.5 Connect the communication & PWM Pump (P0) cable...
AIRA INDOOR UNIT COMPACT ½ communication is separated from the rest of the Mount the four antennas in the supplied antenna communication in its own cable. pack on the top of the indoor unit by screwing them in place into the connectors. The three...
Use a standard 2-core cable (2x0,25 mm2 - 2x0,75 For details how to mount the sensor in the hot mm2). Connect it to the TV1 respectively TV2 water cylinder, see manual of Aira Hot water cylinders together with each COM slot in the Indoor Unit Compact.
AIRA INDOOR UNIT COMPACT ½ 7.17 Connect the power supply NOTE! Aira Heat pump 8 is default limited by software to adapt to the German VDE regulations The Aira Indoor Unit Compact must be installed via of unbalanced load. an isolator switch and permanently connected to...
AIRA INDOOR UNIT COMPACT ½ A) Standard 3-phase installation Max supplementary heat: 9kW on L1, L2 & L3 Normal operation: 6kW on L2 & L3 Back-up state: 9kW on L1, L2 & L3 B) Added heating power with L1-L2 jumper Max supplementary heat: 6kW on L1 &...
Config tab and submit to trigger the creation of 10. Check electricity metre for heating a job. 11. Check electricity metre for cooling (if 2. Open the Aira app and log in using the installer applicable) account. 3. Enter the job page in Aerospace via Skedulo and click on the button "Go to app to configure...
The thermostat is successfully connected to the heat pump. The Aira Room thermostat is commissioned by the installer, using the installer login in the Aira app. DISCONNECTED The room thermostat has failed to Insert 3xAAA batteries in the direction as connect to the heat pump or lost the printed in the battery holder.
The owner will be notified via a push notification from the Aira app. When the app is opened, a prompt to contact customer support will be covering the middle part of the app screen.
For more details, see the manual of Aira Hot water cylinders 9.3.2 Overheating protection reset The overheating protection activates to protect the Indoor Unit Compact from damaging heat levels.
10. END OF USE Product disposal Personal data Care for the environment! No part of the heat pump Personal data can be deleted by contacting Aira system is allowed to be discarded with household customer support. waste! These products contain electrical or electronic components that should be recycled.
Need help?
Do you have a question about the HPI-HB-1.5 and is the answer not in the manual?
Questions and answers