Hardware Installation; Driver Installation; Installation For Windows; Installation For Linux - ST-Lab U-2710 User Manual

2.2 Hardware Installation

1. Plug the USB4 40Gbps 10G Ethernet Adapter directly into an
available USB port on your computer.
2. Connect one end of your network cable into the RJ45 port of USB4
40Gbps 10G Ethernet Adapter.
3. Connect the other end of the network cable into an available
Ethernet port on your router, switch, or any other networking
device.

2.3 Driver Installation

The following section shows you how to install the USB4 40Gbps
10G Ethernet Adapter driver on different operating systems

2.3.1 Installation for Windows

1. Go to URL http://www.sunrichtech.com.hk/
2. Search U-2710, download the driver.
3. Follow the on-screen instructions to finish installing the driver.

2.3.2 Installation for Linux

1. Go to URL http://www.sunrichtech.com.hk/
MN3000000206 Page 7