BE Landworks 126 WC15F-R Instruction Manual

Wood chipper

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Wood Chipper

Instruction Manual

WARNING:

Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules

and other basic safety precautions may result in serious personal injury.

Save these instructions in a safe place and on hand so that they can be read when required. Keep

these instructions to assist in future servicing.

REV 11/22/19

Table of Contents

Need help?

Do you have a question about the Landworks 126 WC15F-R and is the answer not in the manual?

Questions and answers

Summary of Contents for BE Landworks 126 WC15F-R

Page 1 Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Save these instructions in a safe place and on hand so that they can be read when required. Keep these instructions to assist in future servicing.
Page 2: Warning Symbol
This is a petrol engine-powered chipper shredder that breaks up leaves and wooded pieces such as tree branches, brush, and limbs into smaller volume via a high-speed rotor containing chipping blades and shredding hammers. It shall not be used for any other purpose.
Page 3: Table Of Contents
INDEX Features ----------------------------------------------------------------------------------------------------------------------------------------- 1 Specifications --------------------------------------------------------------------------------------------------------------------------------- 1 Safety ------------------------------------------------------------------------------------------------------------------------------------------ 2-4 Assembly --------------------------------------------------------------------------------------------------------------------------------------5-6 Operation ------------------------------------------------------------------------------------------------------------------------------------- 6-7 Transportating and Storage --------------------------------------------------------------------------------------------------------------- 8 Maintenance ------------------------------------------------------------------------------------------------------------------------------- 8-10 Trouble Shooting --------------------------------------------------------------------------------------------------------------------------- 10 Repair ------------------------------------------------------------------------------------------------------------------------------------------ 11 Parts Breakdown ----------------------------------------------------------------------------------------------------------------------- 12-14 FEATURES Discharge Chute Handle Housing Engine Tow bar in-feed bin Wheel...
Page 4: Safety
8. Be sure the area is clear of other people before operating. Stop the unit if anyone enters the area. 9. Always maintain secure footing and solid balance while starting or operating the chipper shredder. Never lean directly over the machine.
Page 5 If you experience any of these symptoms, seek fresh air and medical attention immediately. 2. If your machine comes with a separate engine manual, be sure to read and follow all safety and warning precautions outlined there, in addition to any in this manual.
Page 6 Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive. 1. When storing extra fuel be sure that it is in an appropriate container and away from any fire hazards. 2. Prevent fire and explosion caused by static electric discharge. Use only nonmetal, portable fuel containers approved by the Underwriter’s Laboratory (U.L.) or the American Society for Testing &Materials.
Page 7: Assembly
ASSEMBLY The wheel installation (see Figure 1) The tow bar installation(see Figure 2) 1. Put the axle (b) through the axle hole on the base.. 1. Insert the tow bar (b) into the base. 2. Insert the washers (d) into the axle and fix it with the 2.
Page 8: Operation
2. Do not operate on wet or slick surfaces, or near bystanders. 3. Locate and organize the materials to be processed so that you don’t have to walk in front of the inlet or discharge openings, and so you have adequate room to work safely.
Page 9: Transportating And Storage
3. Always use the hopper handle and built-in wheels to move the chipper shredder. Never lift the unit using the fuel tank for support. If the unit must be lifted , always use at least two people, and always grip the unit securely using the front leg and hopper handle.
Page 10: Trouble Shooting
1. Service Interval: Every spring and fall. 2. Check that the safety labels are in place and undamaged. 3. Sample illustrations and part numbers of the decals can be found on page 6. Replace any damaged or missing decals. Inspect Cone, Hopper, & Guards 1.
Page 11 Problem(s) Possible Cause Corrective Action Engine won't start 1. No fuel. 1. Add fuel. 2. Choke not in START position. 2. Turn choke to START position. 3. Low quality or deteriorated, old gasoline. 3. Use fresh unleaded gasoline. 4. Dirty fuel passageways. 4.
Page 12: Parts Breakdown
PARTS BREAKDOWN Part No. Description Q’ty Part No. Description Q’ty Coupler Bearing cover plate Tow bar Emergency stop switch Engine Limit switch Belt cover In-feed bin welding Welding base Handle Rubber block Guard Plate Wheel Guard Plate Engine pulley Bolt full thread M10 * 70 Belt Type 1 non-metallic lock nut M10 Knife...