Table of Contents
Advertisement
Connecting the External Monitor
You can connect an external monitor to your computer through
the VGA port for a larger view with higher resolution.
connect the monitor:
1.
Make sure that the computer is turned off.
2.
Plug the monitor's D-type connector into the computer's
VGA port.
3.
Connect the monitor's power cord and turn on the monitor.
4.
Turn on the computer and the monitor should respond by
default.
If not, you can switch the display mode by
pressing [Fn]+[F2].
display mode by configuring the settings in Display
Properties of Windows operating system.
Connecting the IEEE 1394
The IEEE 1394 port of your computer is a next-generation serial
bus that features a high-speed transfer rate and the connection
of up to 63 devices, allowing you to connect many high-end
peripheral devices and consumer electronic appliances, such
as the DV (digital video camera). The IEEE 1394 standard
interface supports "plug-and-play" technology, so that you can
connect and remove the IEEE 1394 devices without turning off
the computer.
To connect the IEEE 1394 device, simply connect the cable of
the device to the IEEE 1394 port of your computer.
Alternately, you can change the
To
63
Advertisement
Table of Contents
