Advertisement
30440 Agoura Road
Agoura Hills, CA 91301 USA
Toll Free 1 (800) 253-2363
Tel: 1 (805) 933-9970
rangerproducts.com
Heavy Duty Workbench
Assembly and Operation Manual
Manual P/N 5900961 — Manual Revision B — October 2024
Models:
• RWB-2D – Two Drawer
• RWB-2S – Two Shelf
• RWB-1TD – One
Drawer, One Fluid Catch
Designed and engineered by BendPak Inc. in Southern California, USA. Made in China.
⚠
DANGER
Read the entire contents of this manual before using this product. Failure to follow the instructions and
safety precautions in this manual can result in serious injury or death. Make sure all other operators also
read this manual. Keep the manual near the product for future reference. By proceeding with setup and
operation, you agree that you fully understand the contents of this manual.
Advertisement
Table of Contents
Summary of Contents for Ranger RWB-2D
- Page 1 Heavy Duty Workbench Assembly and Operation Manual Manual P/N 5900961 — Manual Revision B — October 2024 Models: • RWB-2D – Two Drawer • RWB-2S – Two Shelf • RWB-1TD – One Drawer, One Fluid Catch Designed and engineered by BendPak Inc. in Southern California, USA. Made in China.
- Page 2 Warranty. The BendPak Ranger warranty is more than a commitment to you: it is also a commitment to the value of your new product. For full warranty details, contact your nearest BendPak Ranger dealer or visit bendpak.com/support/warranty.
-
Page 3: Shipping Information
Introduction This manual describes the RWB-2D, RWB-2S, and RWB-1TD Heavy Duty Workbenches. More information about the full line of Ranger Products is available at rangerproducts.com. This manual is mandatory reading for all users of these Heavy duty Workbenches, including anyone who assembles, operates, maintains, or repairs them. -
Page 4: Safety Information
Make a visual inspection of the product before using it each time. Do not use the product if you find any missing or damaged parts. Instead, take the unit out of service, then contact an authorized repair facility, your distributor, or Ranger Products at (805) 933-9970 follow the prompts to reach sales or service. -
Page 5: Liability Information
BendPak Ranger assumes no liability for damages resulting from: • Use of the equipment for purposes other than those described in this manual. • Modifications to the equipment without prior, written permission from BendPak Ranger. • Damage to the equipment from external influences. •... -
Page 6: Specifications
Depth: 32 in. (813 mm) Width: 48 in. (1219 mm) Drawers/Shelves: 1/1 Components The following illustrations detail the included parts of the Heavy Duty Workbench in each configuration. RWB-2D, RWB-2S, RWB-1TD Heavy Duty Work Bench P/N 5900961 — Rev. B —October 2024... - Page 7 RWB-2D, RWB-2S, RWB-1TD Heavy Duty Work Bench P/N 5900961 — Rev. B —October 2024...
- Page 8 NOTICE If your Heavy Duty Workbench is a RWB-2D – Two Drawer model, please complete the assembly of your Heavy Duty Workbench using the two steps listed below. 5. If the drawers are not installed, push on the black plastic levers on the sides of the drawer. Left side of drawer lever pressed up.
- Page 9 Maintenance Log RWB-2D, RWB-2S, RWB-1TD Heavy Duty Work Bench P/N 5900961 — Rev. B —October 2024...
- Page 10 Maintenance Log RWB-2D, RWB-2S, RWB-1TD Heavy Duty Work Bench P/N 5900961 — Rev. B —October 2024...
- Page 11 Maintenance Log RWB-2D, RWB-2S, RWB-1TD Heavy Duty Work Bench P/N 5900961 — Rev. B —October 2024...
- Page 12 30440 Agoura Road Agoura Hills, CA 91301 USA bendpak.com © 2024 BendPak Inc. All rights reserved.
Need help?
Do you have a question about the RWB-2D and is the answer not in the manual?
Questions and answers