Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Spartherm S-Thermatik NEO
- Page 1 Operating Instructions S-Thermatik NEO...
- Page 2 PREFACE / QUALITY PHILOSOPHY You have decided in favour of a Spartherm fireplace accessory - thank you for your confidence in our company! In a world of excess and mass production, our company stands for the values expressed by our founder, Gerhard Manfred Rokossa: "High technical quality combined with contemporary design and service to the satisfaction of our customers, so they will recommend us to others".
-
Page 3: Table Of Contents
CONTENTS 1. General information 13. Guide 1.1 Information on installation 14. Disassembly 1.2 Accessories 1.3 Functional description of S- Thermatik NEO 14.1 Safety information for disassembly 14.2 Dismantle unit 2. Safety notes 15. Disposal 3. Menu structure and display 15.1 Disposing of the packaging 3.1 Menu structure 15.2 Disposing of the unit 3.2 Main menu... -
Page 4: General Information
When installing and operating the fireplace and connecting it to the chimney, comply with the national and European standards, the You have decided in favour of a Spartherm fireplace accessory - thank country-specific and local directives and regulations as well as the fire... -
Page 5: Functional Description Of S- Thermatik Neo
1.3 FUNCTIONAL DESCRIPTION OF S- THERMATIK NEO ATTENTION: The cable housings (see 3.3) must be removed, otherwise the control system will not fit inside. Flue gas temperature sensor Display • Dust protection box for S- Thermatik NEO (part no. 1013792) Door Control contact... -
Page 6: Safety Notes
2. SAFETY NOTES • When the firebox door is opened, the air control lever must always move to the right to the "combustion air fully open" position. If that is not done, the fireplace must not be opera- • The S- Thermatik NEO combustion control may only be used in com- bination with a wood-fired fireplace. -
Page 7: Main Menu
3.2 MAIN MENU Layout of the menu: ADDING FRESH FUEL Home (main menu) Statistics User menu Service menu CURRENT TEMP Overview of the last 700 SESAM * Select fireplace burnups System set-up Parameters S-USI II ** Relay Menu Display Doorswitch Menu AIR SLIDER Sound Motor Menu... -
Page 8: General Operation Of The Display
5. USER MENU 3.3 GENERAL OPERATION OF THE DISPLAY Brightness CANCEL The menu layout is broadly self-explanatory. Here is a sample image CHANGES USER MENU for general operation: Sound CANCEL Auto brightness USER MENU Signal transmitter active Menu Home Sound 1 Sound 2 There is a BACK button at the top left of each menu window to enable you to go back one step in the operating process. - Page 9 User menu. By touching this a sensor on the left to enable automatic adjustment to the ambient box, the relay is activated for 3 seconds. This enables the Spartherm brightness (Automatic brightness). In the next submenu you can choose SESAM control system to be activated, for more details see Chapter what you want to see on the screen saver in what brightness.
-
Page 10: Self-Test
CAUTION: Operation of the fire area in Manual mode is at the 1. Switch the combustion control off (pull out the power plug) user's own risk! During a burnup, the air control lever must 2. Switch the combustion control on again (insert the power plug) never be closed to the point where an explosion might occur. -
Page 11: Air Slider Test
7. AIR SLIDER TEST If the door is opened while the fireplace is cold, the control system CURRENT TEMP will first perform an air slider test. This ensures that the air slider can move freely along its entire travel path and that there are no points of sluggishness or blockages. -
Page 12: Power Failure
8. POWER FAILURE 9. SERVICE MENU The S- Thermatik NEO is equipped with a special function. Whenever The Service menu is password-protected and the password is known there is a power failure, the air slider automatically moves into a safe only to the stove fitter and/or the after-sales service. -
Page 13: App
has dropped back into Standby mode. Up until that point, the air slider is never fully closed. • Regardless of the flue gas temperature, whenever the door is ope- ned, the air slider first moves to its 100% position. After a stabili- sation time, it then moves to a position that suits the prevailing flue gas temperature, as defined in the parameter settings. - Page 14 The app is installed the same way as with IOS but with some minor deviations. First, uninstall the old app if you have it. Reboot your smartphone. Under "Settings/Security", allow installation from unknown sources. First click on "Menu" on the bottom left, then on "Devices" and then on "Connect".
-
Page 15: Notes For Stoves
information about the current status of the control system from a func- in the lower section of the appliance. This should always be set to Auto. Only then can the S- Thermatik NEO work properly. When switched to Manual, the S- Thermatik NEO is switched off and the tion monitoring LED that is usually installed in the bottom flap of the display turns dark. -
Page 16: Guide
13. GUIDE Problem description Possible cause / solution Check that the motor cable is plugged into the Error message Motor circuit open or motor error correct bushing. The S- Thermatik NEO burnup controller detects the most significant • Check the motor cable. errors automatically and displays these in the form of clear text NOTE: To reset the error, isolate the control messages. -
Page 17: Disassembly
14. DISASSEMBLY Problem description Possible cause / solution • Does the current parameter set match the In operation 14.1 SAFETY INFORMATION FOR DISASSEMBLY The air lever moves too quickly back to the left appliance? • Check the flue gas temperature display: in the closed position. -
Page 18: Dismantle Unit
The packaging is intended to protect the unit from transport damage. the packaging materials have been selected based on their environ- Warranty conditions can be found at www.spartherm.com. ment-friendly characteristics and are made of recyclable materials. the packaging materials can be returned to the raw material cycle after use. -
Page 19: Eu Declaration Of Conformity
EC Declaration of Conformity as defined by EC directives Low Voltage Directive 2014/35/EU (LVD) Electromagnetic Compatibility 2014/30/EU (EMC) Wireless systems directive 2014/53/EU (RED) Spartherm Feuerungstechnik GmbH Maschweg 38 49324 Melle, Germany hereby declare that the products listed below comply with the above EU Directives: Product type:... - Page 20 IT Il vostro rivenditore specializzato | NL Uw vakhandelaar | PL Państwa sprzedawca Spartherm Feuerungstechnik GmbH Maschweg 38 | 49324 Melle | Tel.: +49 5422 9441-0 Spartherm Feuerungstechnik GmbH | Maschweg 38 | 49324 Melle | Germany | Tel.: +49 5422 9441-0 | www.spartherm.com...
Need help?
Do you have a question about the S-Thermatik NEO and is the answer not in the manual?
Questions and answers