Related Manuals for Feider Machines F1050MPI-A
Summary of Contents for Feider Machines F1050MPI-A
- Page 1 ORIGINAL INSTRUCTIONS >EN JACKHAMMER F1050MPI-A USER GUIDE CAUTION: Read this manual before using this machine!
-
Page 2: Table Of Contents
CONTENTS 1. SAFETY INSTRUCTIONS........................3 2. YOUR PRODUCT........................... 6 3. OPERATION............................7 4. MAINTENANCE AND STORAGE....................... 8 5. DISPOSAL............................... 9 6. DECLARATION OF CONFORMITY....................9 7. WARRANTY............................10 8. PRODUCT FAILURE........................... 11 9. WARRANTY EXCLUSIONS....................... 12... -
Page 3: Safety Instructions
1. SAFETY INSTRUCTIONS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 4 g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles.
- Page 5 Wear safety glasses, protective gloves and sturdy shoes. Wear ear protection to prevent damage to your hearing. The machine must not be damp and must not be operated in a wet environment. Keep long hair away from the machine. Do not operate while wearing loose clothing. Connect the mains plug only when the tool is switched off.
-
Page 6: Your Product
9- Crank cover 4- Lubricant tube 10-Pointed chisel 5- Wrench 11-Flated chisel 6- Rear handle 12-Carbon brush b. Technical data Model F1050MPI-A Power 1300W Voltage 230V~, 50Hz Class protection Class II Guarantee sound power level Lwa: 100dB(A) Sound power level Lwa: 97.8dB(A) K=1.58dB(A) -
Page 7: Operation
declared values depending on the ways in which the tool is used especially what kind of workpiece is processed. Need to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). -
Page 8: Maintenance And Storage
order to begin the striking stroke. This is not due to malfunction of the power tool. It means that the safe guard mechanism against no-load striking is working. Operate this demolition hammer by utilizing its own weight. Switch off and unplug the tool after the end of the operation. The performance will not be better even if it is pressed or thrust forcibly against the work surface. -
Page 9: Disposal
BUILDER SAS ZI, 32 RUE ARISTIDE BERGES – 312070 CUGNAUX – FRANCE Declares that the machinery designated below: JACKHAMMER Model: F1050MPI-A Serial number: 20230511434-20230511933 Complies with the provisions of the Directive « machinery» 2006/42/EC and national laws transposing it: Also complies with the following European directives:... -
Page 10: Warranty
7 . WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identifed as defective by the designated distributor. -
Page 11: Product Failure
8 . PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 12: Warranty Exclusions
9. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 13 BUILDER SAS 32 rue Aristide Bergès - Z.I. du Casque - 31270 Cugnaux - France MADE IN PRC...
Need help?
Do you have a question about the F1050MPI-A and is the answer not in the manual?
Questions and answers