MUST NEVER BE EXCEEDED, as it may damage and/or cause ruptures and/or leakages and/or even break the product, and present a potential hazard and danger to safety, health and/or property. Following are the technical data with respect to the installation of Gessi plumbing products. ► W orkingpressureshouldnotbelowerthan0,5bar(7,25psi)andnotbehigherthan5bar(72Psi).In case of higher working pressure use a pressure reducer valve.
Page 3
Ci-dessous nous indiquons les données techniques concernant l’installation des produits sanitaires Gessi. ► L apressiondeservicenedoitpasêtreinférieureà0,5bar(7,25psi)etsupérieureà5bar(72Psi).En cas de pressions de service plus hautes utiliser une soupape de réduction de la pression.
Page 4
1 - ¡CUIDADO!! LES ROGAMOS QUE TENGAN EN CUENTA QUE NUNCA la presión y/o la temperatura máximaaconsejadaNOTIENEQUESERSUPERADA,yaquepodríadañary/ocausarrupturasy/o pérdidasy/oaveríasdelproductoy,porlotanto,representarunriesgoyunpeligropotencialpara la seguridad, la saludad y/o la propiedad. A continuación Les proporcionamos los datos técnicos relativosalainstalacióndelosproductosdegriferíaGessi. ► L apresióndeejercicionotienequeserinferiora0,5bar(7,25psi)ysuperiora5bar(72Psi).Encaso depresionesdeejerciciomayores,utilicenunaválvuladereduccióndelapresión. ►Presiónmáximadeensayodurantelainstalación:8bar(116psi). ► E vitengrandesdiferenciasdepresiónentrelaalimentacióndelaguafríayaquelladelaguacaliente. Lasdiferenciasdepresión,elaguaconunalatocontenidomineralylassustanciasjabonosaspueden...
PRE-INSTALLATION INFORMATION - PRÉALABLES - PRELIMINARES Before installation and setting to work Attention! The feeding pipes have to be rinsed thoroughly before the installation of the mixer, so that no shavings, welding or hemp residual or other dirt can be found in the pipes. Foreign bodies can enter the mixer through the rinsed pipes or the general water plant and could damage the washers/ring washers.
Page 9
PRE-INSTALLATION INFORMATION - PRÉALABLES - PRELIMINARES...
Page 10
PRE-INSTALLATION INFORMATION - PRÉALABLES - PRELIMINARES Package content: Contenido de la caja: A - Mixer A - Mezclador B - Fastening set for control B-Juegodefijaciónparaelmando C - Fastening set for supply spout C-Juegodefijaciónparaelcañodeerogación D - Spacer ring D - Anillo distanciador E-Spoutjunction E-Uniónparacaño F-Pop-upwasterod(Art.65011-65012-65015)
Page 11
PRE-INSTALLATION INFORMATION - PRÉALABLES - PRELIMINARES 5/8” 11/16” 3/4” [16 mm] [17 mm] [19 mm] 1-1/4” 1-7/16” 1-7/16” [31 mm] [36 mm] [37 mm] - Installation tools - Outils nécessaires pour l’installation - Herramienta necesaria para la instalación...
Page 12
PRE-INSTALLATION INFORMATION - PRÉALABLES - PRELIMINARES Only for Art.: 65011-65012-65015...
MAINTENANCE - ENTRETIEN - MANUTENCIÓN MAINTENANCE • Should it be necessary to replace one or more components, contact an authorized retailerorvisitWWW.GESSI.COM • Product maintenance should be made only by qualified staff ENTRETIEN • S’il est nécessaire de remplacer un ou plusieurs composants, contacter un centre autoriséouvisiterlesiteWWW.GESSI.COM...
Page 19
MAINTENANCE - ENTRETIEN - MANUTENCIÓN HEADVALVE REPLACEMENT - SUBSTITUTION DE LA TÊTE - SUSTITUCIÓN DE LA MONTURA Fig. 1 Fig. 2 1/8” [2,5 mm] Fig. 3 Fig. 4 1/8” [2,5 mm] 11/16” [17 mm]...
Page 20
MAINTENANCE - ENTRETIEN - MANUTENCIÓN AERATOR CLEANING / REPLACING - NETTOYAGE / SUBSTITUTION DE L’AERATEUR - LIMPIEZA / SUSTITUCIÓN DEL AIREADOR Fig. 1 Fig. 2 Supplied Fourni Incluido en el suministro...
Need help?
Do you have a question about the VENTI2O 65011 and is the answer not in the manual?
Questions and answers