Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GoveeLife H5191
Summary of Contents for GoveeLife H5191
- Page 1 Mode:H5191/H5192 Smart Wireless Meat Thermometer...
-
Page 2: Safety Instructions
Safety Instructions Read and save these instructions: Do not let children use this product, as there is a risk of injuries from the temperature probes. Avoid exposing the thermometer body to high temperatures. Do not attach it to the surface of a high-temperature stovetop, oven, or grill. - Page 3 Always use eye protection when removing a probe that has exceeded the maximum temperature or come in contact with hot charcoals or direct fames. DO NOT use the probe when searing. If the probe cooking appliance and close the lid immediately. Allow the probe to cool completely before removing.
- Page 4 DO NOT run the probe under cold water immediately after cooking. Let the probe cool down prior to washing. DO NOT exceed the probes internal sensor limit of 212°F/100 or the ambient sensor limit of 572°F /300 . Temperatures above these maximums may damage the probe.
-
Page 5: Package Includes
Probe Sharp Point Hazard Always keep the probe pointed away from fingers and body. Contact may result in injuries. Keep out of reach of children. Package Includes Item B5191011 B5192011 Temperature Probe Probe Base Charging Cable User Manual Service Card Quick Start Guide... - Page 6 At a Glance (1-Probe) Internal Ambient Screen Display Wi-Fi Signal Internal, Ambient Alarm Mute Probe Number Bluetooth Probe Battery Preset Temperature Current Temperature Probe Base Battery Temperature Unit...
- Page 7 Speaker Hole Shutdown LCD Screen Button Type-C Charging Port Power Button Magnetic Cover Function Button Magnet (on the back） Probe Probe Base Power Button Press for 3 seconds to turn on/off. Function Button Short Press to switch bettwen the current temperature and alert temperature.
- Page 8 At a Glannce (2-Probe) Internal Ambient Screen Display Wi-Fi Signal Internal, Ambient Alarm Mute Probe Number Bluetooth Probe Battery Preset Temperature Current Temperature Probe Base Battery Temperature Unit...
- Page 9 Speaker Hole Shutdown LCD Screen Button Type-C Charging Port Power Button Magnetic Cover Function Button Magnet (on the back） Probe Probe Base Power Button 1. Press for 3 seconds to turn on/off. 2. Short press to switch between the current temperature and alert temperature.
- Page 10 Probe and Bottom Indicator Safety Notch Internal Sensor Ambient Sensor Internal Sensor For detecting the internal temperature of the food. Ambient Sensor For detecting the ambient temperature of the probe. Safety Notch Always insert the probe past the safety notch. Note：...
-
Page 11: Getting Started
Getting started Follow the simple steps below to set up your meat thermometer and help you cook like a pro！ Step 1: recommended to use the Base after it is fully charged the screen will start to display. Place the probe into the Base and charge for 25 minutes before use. - Page 12 detected temperature reaches the target sound and the app will push you an alert Step 5: indicates that the ambient temperature has dropped to a safe level before removing it. When removing Step 6: Use a clean damp cloth to wipe the probe after use.
- Page 13 Connecting to the Wi-Fi Network Notice: a. Make sure the Wi-Fi router supports 2.4GHz and 802.11 b/g/n bands; b. Turn on Bluetooth in your mobile phone. Open the Govee Home, tap “+” icon in the top right corner and select “H5191/H5192”.
-
Page 14: Charging Precautions
Follow instructions on the app to complete connection. Please check the above steps and try again if connection failed. Temperature Alerts & Alarms Cooking Temperature Alert When the monitored temperature reaches the preset cooking temp, the alarm will sound and the app will push an alert notification. -
Page 15: Specifications
When the probe's battery reaches 10%, the probe battery indicator will flash at 1-second intervals. When the probe is fully charged, the indicator will always be on (please note that the probe will enter hibernation when charging, therefore, the screen will not show the probe battery. You can take it out at any time and reconnect it to the Base to check the battery). -
Page 16: Troubleshooting
Troubleshooting 1.The screen will display error codes under the following circumstances: Screen display Connotation The probe is damaged, please contact customer service or buy a new probe. The base temperature is abnormal. Probe temperature is too high/low. HHH/LLL 2.Cannot connect to Wi-Fi. Check that the thermometer is connected to your Wi-Fi router’s 2.4GHz network (5GHz is not supported). - Page 17 Customer Service Warranty: 12-Month Limited Warranty Support: Lifetime Technical Support Email: support@govee.com @Goveelife @GOVEE @GoveeLife...
-
Page 18: Compliance Information
Compliance Information FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 19: Fcc Radio Frequency Exposure Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged. Device types: H5192, H5191 (FCC ID: 2A7VD-H5192) has also been tested against this SAR limit. SAR information can be viewed on‐line at http://www.fcc.gov/oet/ea/fccid/. - Page 20 Contact information: https://www.govee.com/- support FOR INDOOR USE ONLY The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen Qianyan Technology LTD is under license. The trademark GoveeLife has been authorised to Shenzhen Qianyan Technology LTD. Copyright ©2021 Shenzhen Qianyan Technology LTD. All Rights Reserved.
Need help?
Do you have a question about the H5191 and is the answer not in the manual?
Questions and answers