Page 1
PIANO ST AND SETUP GUIDE GUIDA AL MONT AGGIO Please read this guide carefully and properly take care of it Leggete questa guida e conservatela per future consultazioni...
Page 2
Dear customer, First of all thanks far purchasing a SOUNDSATION® product. Our mission is to satisfy all possible needs of musical instrument and professional audio users offering a wide range of products using the latest technologies. We hope you will be satisfied with this item and, if you want to collaborate, we are looking for a feedback from you about the operation of the product and possible improvements to introduce in the next future.
Page 3
ENGLISH AUDES ST AND - SETUP GUIDE COMPONENTS 4 x Corner brackets 1 x Left Plate 1 x Right Plate Component Component 4 x Bolt 12 x Screw (M4x16) 8 plastic screw covers 8 x Screw (M5x40) Stand Rear Panel Bar with 3 Pedals Component...
Page 4
ENGLISH AUDES ST AND - SETUP GUIDE SETUP Install the corner brackets on lateral panels Please fix the corner brackets on both inner sides of the stand supports with the 12 short M4×16 screws for each panel as shown in the figure below. 2) ASSEMBLY of the bar with 3 PEDALs Component Install the pedal bar from the rear using 4 long screws (M5×40)
Page 5
ENGLISH AUDES ST AND - SETUP GUIDE 3) Installing the STAND REAR panel Install the back panel using 4 long screws (M5×40) Use plastic screw covers to cover the screw holes. 4) Fixing the piano on the stand Place the piano on the corner brackets previously mounted on the stand and then use the four knobs to secure the piano to the stand.
SOUNDSATION shall satisfy the warranty obligations by remedying any material or manufacturing faults free of charge at SOUNDSATION’s discretion either by repair or by exchanging individual parts or the entire appliance. Any defective parts removed from a product during the course of a warranty claim shall become the property of SOUNDSATION.
Page 7
ITALIANO AUDES ST AND - GuIDA AL MONT AGGIO COMPONENTI COMPONENTI 4 x Staffe Angolari 1 x Pannello Sinistro 1 x Pannello Destro Stand Stand 12 x viti corte (M4x16) 8 x Viti lunghe (M5x40) 8 Coprivite in plastica 4 x Manopole Pannello posteriore Stand Barra con...
Page 8
ITALIANO AUDES ST AND - GuIDA AL MONT AGGIO MONTAGGIO 1)^Montaggio staffe Angolari sui Pannelli Fissare le staffe angolari su entrambi i lati interni dei supporti dello stand con le 12 viti corte M4×16 per ogni pannello come mostrato nella figura sotto. 2)^MONTAGGIO della barra con uNITA’...
Page 9
ITALIANO AUDES ST AND - GuIDA AL MONT AGGIO 3)^Installazione del pannello POSTERIORE Installare il pannello posteriore usando 4 viti lunghe ( M5×40) Utilizzare i coprivite in plastica per coprire i fori delle viti. 4)^Fissaggio del piano sullo stand Appoggiare il piano sulle staffe angolari precedentemente montate sul supporto e quindi utilizzare le quattro manopole per fissare il pianoforte al supporto.
In alternativa è possibile inviare il prodotto a SERVICE CENTER SOUNDSATION - Via Enzo Ferrari, 10 - 62017 Porto Recanati - Italia. Per poter inviare un prodotto al centro di assistenza è necessario un numero di RMA. Le spese di trasporto devono essere coperte dal proprietario del prodotto.
Page 11
Questo prodotto viene importato nella UE da FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati - Italy www.soundsa tionmusic.com Soundsation® is a registered trademark of FRENEXPORT SPA - Italy Soundsation® è un marchio di fabbrica registrato di FRENEXPORT SPA - Italy...
Page 12
FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati - Italy www.soundsa tionmusic.com Soundsation® is a registered trademark of FRENEXPORT SPA - Italy Soundsation® è un marchio di fabbrica registrato di FRENEXPORT SPA - Italy Ver 1.0 - Jul. 2024...
Need help?
Do you have a question about the AUDES STAND and is the answer not in the manual?
Questions and answers