Thank you for purchasing this product To ensure optimum performance and safety, read the following instructions before connecting, operating, or adjusting the product. Keep this manual for future reference. Table of Contents Introduction..................................2 Features ....................................2 Package Contents ................................2 Charging ....................................
Introduction The Dark Matter Hyper-K Wireless Ultralight Gaming Mouse by Monoprice uses PixArt optical sensor. The Hyper-K wireless offers six predefined programmable settings ranging from 800 to 16,000 DPI with corresponding LEDs of red, green, blue, purple, yellow, and cyan colors. The rechargeable battery has a capacity of 300mAh and will operate for up to 50 hours without LED enabled.
Charging When the internal battery charge is low, the scroll wheel LED will flash red. 2. Plug one end of the included USB Charging Cable into the mouse, then plug the other end into a USB power source. The scroll wheel LED will flash blue while charging is in progress.
Specifications 44028 Sensor PixArt® PAW 3335 DPI Settings 800, 1600, 3200, 6400, 12000, 16000 Scroll Wheel LED Colors Red, Green, Blue, Purple, Yellow, Cyan Polling Rate Up to 1000Hz Acceleration Compatible Operating Systems Windows® XP/2000/Vista®/7/8/10, macOS® Button Life 20 million presses Nominal Input Power 5 VDC, 30mA Battery Capacity...
Page 7
If you have any problems with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com.
Modifying the equipment without Monoprice's authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
Page 9
Monoprice, including the use of non-approved antennas, could void the user's authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the DARK MATTER Hyper-K Wireless and is the answer not in the manual?
Questions and answers