Summary of Contents for Meet PAT Semi Portable Temporary
- Page 1 Where innovation flows. Semi Portable Refill Station Temporary XS-RS-03-TM INFORMATION BOOKLET 23301 IB-011-00-00...
- Page 2 Meet the world’s smartest water station...
- Page 3 WELCOME We began meetpat to change the way people think about public water stations, and in doing so we believe we can drive change for generations to come. meetpat acknowledge and pay respects to Wiradjuri peoples, Elders and Country whose land we operate our business. We also acknowledge that Aboriginal and Torres Strait Islander peoples hold extensive knowledge about connections to water, which has been practiced for thousands of generations.
-
Page 4: Table Of Contents
CONTENTS Disclaimer & Safety ....................5 Semi Portable Overview Parts Supplied & Product Range ................6 Initial Set Up Refill Station Base Fitting ..............9 Register Water Station ..............11 Water Filter ..................12 Solar Lighting ................... 13 Tall Extension Kit ....................14 Installation .................. -
Page 5: Disclaimer & Safety
DISCLAIMER & SAFETY Adhere to the risks/cautions outlined by meetpat, along with the regulations outlined by the local governing body. RISK/CAUTION DISCLAIMER CHECK Structural Integrity of meetpat takes no responsibility for the structural integrity of the mounting surface chosen Mounting Surface and recommends consultation with an engineer or other suitable parties prior to mounting. -
Page 6: Parts Supplied & Product Range
Product Overview | Set Up Semi-Portable Temporary XS-RS-03-TM This water station is manufactured using stainless steel and powdercoated aluminium. With a lead free plumbing system and anti-bacterial bottle refill dispenser. This water station comes with a heavy duty base and a pair of non slip HDPE ramps. - Page 7 OVERVIEW | REFILL STATION | PARTS SUPPLIED Refill Station Base Plate Water Supply inc Connectors 1/2” Threaded Connector Graphics Panel Set Ramp Set Drain 1/2” Threaded Connector ACCESSORIES purchase separately Tall Extension Kit PM-TK-01 Water Filter AX-FS-01 AX-FR-01 AX-FL-01 Hose Kit PT-HK-01-WM Joiner Kit PT-JK-01...
- Page 8 OVERVIEW | SEMI PORTABLE BOTTLE REFILL Solar Lighting Module Maintenance PG 13 EXTERNAL FEATURES Sensor Battery Pack Maintenance PG 30 Bottle refill window outlet Bottle refill window sensor NOTE - FRONT SHOWN reference the sensor INSTALLATION REQUIRED GRAPHIC PANELS - PG 18 INSTALLATION REQUIRED WATER FILTER - PG 12...
-
Page 9: Refill Station Base Fitting
OVERVIEW | SEMI PORTABLE INITIAL SET UP Set up your water station prior to commencing the installation. Ensure all items removed during the process are set aside and reattached after install. Anti- Remove Clock- Loosen Only Allen Key Screws clockwise Completely Allen Key Screws... - Page 10 OVERVIEW | SEMI PORTABLE INITIAL SET UP Place and locate the Bolts & Washers Clockwise Screws refill station onto the Allen Key Allen Key previously removed base. Press fit the water and Fit and tighten all drainage connections previously removed from the water station to bolts in place.
-
Page 11: Register Water Station
INITIAL INSTALL | REGISTER WATER STATION RECORD YOUR INFORMATION HERE SERIAL NUMBER: If you are undertaking the initial install of this water station. REGISTRATION Locate and record the Serial Number CODE: & Registration Code here. Any future access to this information DESCRIPTION: requires removal of front panel. -
Page 12: Water Filter
FITTING THE FILTER | READY FOR USE Locate and unbox the filter from box. Locate the filter plug. Install new water filter, by Turn filter plug. To completely remove. turning to fit. Hand tighten. KEEP PLUG. DO NOT DISCARD. FLUSH THE WATER MOVE TO SET UP OF YOUR FIRST USE WILL REQUIRE SOLAR LIGHTING... -
Page 13: Solar Lighting
TURN ON SOLAR LIGHTING | READY FOR USE Water stations are fitted with a solar lighting module, which should be turned on and checked during the initial set up process. Locate and detach the solar lighting module I look like this. Solar Panel THIS SYSTEM IS FITTED WITH AN AUTOMATIC LOW LIGHT SENSOR IT WILL ONLY ILLUMINATE DURING LOW LIGHT (NIGHT TIME) OR WHEN THE SOLAR PANEL IS FULLY COVERED. -
Page 14: Tall Extension Kit
Tall Extension Kit meetpat accessories | PM-TK-01 meetpat Tall Extension Kit is compatible with permanent and semi-portable Bottle Refill Stations. The kit is manufactured using powdercoated aluminium featuring polycarbonate graphics panels with antigraffiti protection. - Page 15 OVERVIEW | TALL EXTENSION KIT | PARTS SUPPLIED The Tall Extension Kit is not a stand alone product and must be installed to a permanent or semi-portable meetpat bottle refill station. 4mm Backing Panels (Ground mount x2) (Wall mount x1) 2mm Graphics Panels (Ground mount x2) (Wall mount x1) EXTERNAL FEATURES...
-
Page 16: Installation
INSTALLATION | TALL EXTENSION KIT Complete the assembly and installation for the bottle refill station, as outlined in the information booklet. Ensure all items removed during this process are set aside for reattaching after the unit has been installed. Slide down 2x Bracing Sections. Screws Clockwise Allen Key... -
Page 17: Fitting Panels
Fitting Panels Finalising your water station. Last steps. Installing the graphics panels is the last step to completing your water station installation. These polycarbonate, weather resistant coverings provide the finishing touch to your water station. - Page 18 FITTING PANELS | REFILL STATION Ensure you have completed all steps prior to fitting your graphic panels. Slide down to Slide down to install Clockwise Screws install the lighting the front and back* Allen Key backing panel. graphics panel(s). Fit the bottle refill *Only on ground surrounds.
- Page 19 FITTING PANELS | TALL KIT AND REFILL STATION Only applicable for water stations fitted with a tall extension kit. Slide down to fit all panels. *Only on ground mount model Screws Clockwise Allen Key Fit the bottle refill surrounds. Slide down to fit Slide down to fit Anti- Screws...
-
Page 20: Set Up Guide
Set up guidelines We designed meetpat’s advanced modular system to make drinking water accessible for everyone. We are proud to supply world leading bottle refill stations, for long term, large scale events. Simple to set up with a heavy duty base and ramp system, for stand alone or interconnect multiple units additional filling points. -
Page 21: Accessibility & Safeguards
SET UP GUIDE | ACCESSIBILITY & SAFEGUARDS CHECK SAFEGUARDS Check water source/tap for pressure and clean, potable water. Assess set up location and surface, traffic clearance, pedestrians and O&S guidelines. Do not set up in subzero temperatures. Water stations and hosing exposed to direct sun in extreme temperature environments, may cause water and surface temperatures to... -
Page 22: Single & Multiple Set Up
SET UP GUIDE | SEMI PORTABLE SET UP Place water station(s) Align and link multiple units by into desired location. locking joiner clamps. OPTIONAL Fix units to the ground through these holes. Connect the tap adapter and drinking water hose MEETPAT RECOMMEND *Hoses can be fitted to either/any end of a water station. - Page 23 SET UP GUIDE | SEMI PORTABLE SET UP If connecting multiple water stations - use joiner hoses (purchased separately) to connect the units. Connect the drainage hose. Pull back the connector cover and hold in place. Insert the adapter into the connector.
-
Page 24: Pack Down
SET UP GUIDE | SEMI PORTABLE SET UP Locate the ramps to both side of the unit Clockwise Screws 8mm Allen Key to tighten (each plate) PACK DOWN Activate all of the Turn off water supply. refill sensors to remove all the pressurized water in the water station(s). -
Page 25: Refill Station Overview & Scheduling
Water station | Maintenance & Servicing Semi Portable Refill Station & Accessories You have chosen to install a meetpat water station. These world leading water stations are manufactured with premium components and leave the factory carefully checked. To ensure the water station is functioning correctly and in perfect condition. Please take time to familiarise yourself with our maintenance and servicing procedures ensuring the water station continues to function at the supplied high standard. - Page 26 MAINTENANCE | OVERVIEW & SCHEDULING GENERAL CHECK (BEFORE AND AFTER EACH USE) Clean nozzle Clean drainage grate Wipe clean surfaces and graphics panels Check and clean sensor button Check the hoses, fittings and water station are clean and free from debris, prior to connecting DETAILED CHECK...
-
Page 27: Panel Removal & Replacement
PANEL | REMOVAL & REPLACEMENT INTERNAL ACCESS IS ALWAYS FROM THE FRONT OF THE WATER STATION ONLY REMOVE THE REQUIRED PANEL(S) REFERENCE THE SENSOR BUTTON TO COMPLETE THE INTENDED TASK Anti- Remove Clock- Loosen Only Allen Key clockwise Completely Allen Key Screws Screws DO NOT REMOVE... -
Page 28: Filter | Installation & Replacement
FILTER | INSTALLATION & REPLACEMENT ALWAYS TURN OFF WATER SUPPLY Activate the sensor to flush out any air bubbles and old water in the lines. Locate used filter. Turn to completely remove. Ensure the front graphics panel is removed. Refer panel removal PG-27 Install new filter. -
Page 29: Mesh Filter Clean & Replacement
MESH FILTER | CLEAN & REPLACEMENT ALWAYS TURN OFF WATER SUPPLY Activate the sensor to flush out any air bubbles and old water in the lines. Locate the Remove front water inlet graphic panel assembly. only. REFER PAGE 27 REFER PAGE 19 To locate the Mesh Run water over Mesh Reinstate the Mesh... -
Page 30: Sensor Tap Battery Replacement
SENSOR TAP | BATTERY REPLACEMENT ALWAYS TURN OFF WATER SUPPLY Activate the sensor to flush out any air bubbles and old water in the lines. Locate the battery pack. Remove front graphic panel only. REFER PAGE 27 REFER PAGE 19 Detach and retain 4x screws and Install 4x new AA batteries and cover plate. -
Page 31: Cleaning Instructions
STANDARD | CLEANING INSTRUCTIONS Clean and wipe Use a scrubbing down all external brush to clean surfaces. Use the drain mesh. non-acidic, non Ensure the mesh abrasive cleaner is free from any debris. and brush (if required) Check the base for dirt. -
Page 32: Troubleshooting
TROUBLESHOOTING Identify the Problem Remove front panel(s) to view the full function of the water station. This will help you correctly identify the fault, damage and/or leak. On-site Repair Many problems can be easily fixed onsite. • Removal of dirt/debris. •... -
Page 33: Warranty
WARRANTY | MEETPAT POLICY What is covered by this defects warranty policy? meetpat warrants that new products purchased either from meetpat direct or through authorised distributors, which are still in the possession of the initial purchaser, will be free from defects for the warranty period, subject to the terms of this policy. A product may be defective if meetpat finds that it is non-conforming in material or workmanship and if the non-conformance materially impairs the performance of the product having regard to the purpose for which it was designed and the limitations stated... -
Page 34: Looking For Help
Looking for help? General enquiries/sales sales@meetpat.com.au | +612 6021 0300 Faults and servicing service@meetpat.com.au | +612 6021 0300 Spare parts sales@meetpat.com.au | +612 6021 0300... - Page 36 Please ensure you follow the supplied current guidelines when installing and servicing your water station. For the most up to date copy of this Information Booklet, please visit meetpat.com.au Meet Pat | Meet PAT Pty Ltd | meetpat.com.au Phone: (02) 6021 0300, +612 6021 0300 Email: sales@meetpat.com.au...
Need help?
Do you have a question about the Semi Portable Temporary and is the answer not in the manual?
Questions and answers