Product Disposal and Recycling .............. 11 Product Support ..................11 Introduction Thank you for purchasing your REED SW700 Heat Stress Stopwatch. Please read the following instructions carefully before using your instrument. By following the steps outlined in this manual your meter will provide years of reliable service.
• Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children. REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com...
14 to 140°F (-10 to 60°C) Storage Temperature: 14 to 140°F (-10 to 60°C) Operating Humidity Range: 0 to 99% Dimensions: 2.7 x 3.6 x 1.0" (68 x 92 x 23 mm) Weight: 2.9oz (83g) REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com...
Instrument Description Lap reset Day of the week indication Minutes, seconds 1/100th second display Mode Selection Start/stop/set Alarm set indicator Shock and water resistant case 48" nylon lanyard REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com...
Operating Instructions Selecting Measurement Modes The SW700 offers 8 types of measurement modes to choose from: Time & Date Mode (Displays hour, minutes, seconds and day of the week) Temperature and Humidity Mode (Displays the ambient temperature and humidity) Heat Index Mode (Combines the temperature & humidity to display...
15. Press the MODE button to save your selections and resume normal operation. NOTE: The meter will automatically exit out of the Setup mode if no key is pressed within 30 seconds continued... REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com...
Press the LIGHT button to turn the LCD Backlight on and will automatically turn off after approx. 5 seconds. Enabling/Disabling the Beeper While in Time and Date mode, press the START/STOP button to enable/disable the beeper. REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com...
REED Instruments guarantees this instrument to be free of defects in material or workmanship for a period of one (1) year from date of shipment. During the warranty period, REED Instruments will repair or replace, at no charge, products or parts of a product that proves to be defective because of improper material or workmanship, under normal use and maintenance.
Product Support If you have any questions on your product, please contact your authorized REED distributor or REED Instruments Customer Service by phone at 1-877-849-2127 or by email at info@reedinstruments.com. Please visit www.REEDInstruments.com for the most up-to-date manuals, datasheets, product guides and software.
Need help?
Do you have a question about the SW700 and is the answer not in the manual?
Questions and answers