Local Control; Reset - Kurzweil Mark-Pro ONEi Owner's Manual

4. Local Control

Local Control is the connection between the keyboard of the MARK PRO ONE i and the internal
sound producing circuitry of the instrument. Normally, Local Control is ON; in fact, every time
you power-up the MARK PRO ONE i, it automatically sets to Local Control ON, so you can
play the keyboard and hear the sounds of the instrument. But, there are reasons for setting Local
Control to OFF especially when MIDI Out of the MARK PRO ONE i is connected to feed back
to the instrument's MIDI In port. One example of this is when using an external sequencer whose
MIDI In port is connected to MIDI Out of the MARK PRO ONE i and whose MIDI Out port is
connected to MIDI In of the MARK PRO ONE i.
In such a case, you can eliminate the doubling of
notes by setting Local Control to OFF.
While holding down the Function button, press
the key C5 or C#5 to set Local Control. See Page
22 for more about your MARK PRO ONE i's
MIDI features
Function
Metro/Rhythm
Rec
Play/Stop
Layer
Voice/Piano

5. Reset

Since the MARK PRO ONE i does not have a display, it is hard to know the current settings. If
you get confused or want to restore the default settings, just hold down the Function button then
press and release the C8 key. After doing this, all of the settings will be reset to their defaults.
Function
Metro/Rhythm
Rec
Play/Stop
Layer
Voice/Piano
Key
C5
C#5
Local On/Off
C5
C#5
Local Control
ON(Default)
OFF
Reset
C8
19
Function Button