Philips 50PUS7009 User Manual page 22

the installation. Select the correct country and skip the
channels search. Finish the installation. When done,
continue with step 2.
2 - Plug in the USB �ash drive that holds the channel list
of the other TV.
3 - To start the channel list upload, select
> >
>
PIN code if necessary.
4 - The TV noti�es you if the channel list is copied to the
TV successfully. Unplug the USB �ash drive.
While watching a channel, you can set some options.
Depending on the type of channel you are watching or
depending on the TV settings you made, some options
are available.
To open the options menu...
1 - While watching a channel, press 
2 - Press  again to close.
Select
programme you are watching.
To call up the details of the selected programme...
1 - Tune to the channel.
2 - Press to open or close programme info.
3 - Alternatively, you can press 
select
programme info.
4 - Press to close the programme info.
To switch on Subtitles, press 
.
You can switch subtitles
Alternatively you can select
If language information is part of the digital broadcast
and the broadcasted programme is not in your language
(the language set on TV), the TV can show subtitles
automatically in one of your preferred subtitle
languages. One of these subtitle languages must also be
part of the broadcast.
You can select your preferred subtitle languages
in .
>
and press . Enter your
to view the information of the
,
and press to open the
and select
or
.
If none of the preferred subtitle languages are available,
you can select another subtitle language if available. If
no subtitle languages are available, you cannot select
this option.
or
If none of the preferred audio languages are available,
you can select another audio language if available. If no
audio languages are available, you cannot select this
option.
If an audio signal contains two audio languages but one
language or both has no language indication, this option
is available.
.
If prepaid premium content is available from a CAM, you
can set the provider settings with this option.
You can switch the sound of an analogue channel to
Mono or Stereo.
To switch to Mono or Stereo...
Tune to an analogue channel.
1 - Press 
press (right).
2 - Select
3 - Press  (left) repeatedly if necessary, to close the
menu.
Select
.
the channel.
To call up the details of the selected channel...
1 - Tune to the channel.
2 - Press 
to open the channel info.
3 - Press 
programme info.
22
, select
or and press .
to view the technical information of
, select
again or press
and
and press
to close the