Download Print this page

Zencontrol zc-iot-bridge Manual

Wireless bridge

Advertisement

Quick Links

Product range
Order code
Description
zc-iot-bridge
Wireless bridge
zc-iot-bridge-oem
Wireless bridge for OEM*
zc-iot-bridge-oem-s
Wireless bridge for OEM with nano+ sensor*
Specifications
Supply voltage
9.5 - 22.5 V (DALI line)
Control system
IEC62386-104 over Thread
DALI line current
40 mA
0.2 - 1.5 mm
Wiring
0.2 - 0.5 mm
Strip 8 - 9 mm
Operating temperature -10 to 60°C
Material
PC
Mounting
Inbuilt
Ingress protection
IP20
Classification
III
Safety information
■ This product must only be installed by a licensed electrician.
■ Before commencing installation turn off and isolate the
electrical supply.
■ There are no user serviceable parts, attempting to service any
part of the product will void the warranty
■ DALI is not SELV and as such should be treated as LV.
■ As the installer, it is your responsibility to ensure you comply
to all relevant building and safety codes. Refer to application
standards for the relevant rules.
■ When the installation is complete, leave this manual with the
building's owner for future reference.
(DALI)
2
(accessories)
2
Dimensions
Mounting options
Inbuilt
Dimensions
80 / 16 / 30 mm
Ø4.5
51
71
Wireless system overview
Wireless switch
IEC 62386-301
IEC 62386-104
over Thread
Wireless sensor
IEC 62386-303
IEC 62386-304
IEC 62386-101
zc-iot-bridge
IEC 62386-103
Installation
Remove the product from the box and inspect it for any
damage. If you believe the product to be damaged or otherwise
unsound, do not install the product. Please pack it back into its
box and return it to the place of purchase for replacement.
If the product is satisfactory, proceed with the installation:
1 Ensure safety warnings are adhered to.
2 Wire according to wiring diagram, as shown in fig 1.
3 Optional: Break off back tab, and align front tab to case, per fig 2.
Do not mount the device directly to any metallic service. A gap of at least
10mm to any metal surface should be observed for best RF performance.
Antenna
N
L
30
80
Wireless driver
IEC 62386-207
Wireless DT8 driver
To
zencontrol
IEC 62386-209
Cloud
zc-iot-fc
IEC 62386-103
D4i driver
Antenna
Ethernet
N
L
16
E

Advertisement

loading
Need help?

Need help?

Do you have a question about the zc-iot-bridge and is the answer not in the manual?

Questions and answers

Summary of Contents for Zencontrol zc-iot-bridge

  • Page 1 IEC 62386-207 IEC 62386-104 over Thread Product range Order code Description Wireless DT8 driver Wireless sensor zencontrol zc-iot-bridge Wireless bridge IEC 62386-209 IEC 62386-303 Cloud IEC 62386-304 zc-iot-bridge-oem Wireless bridge for OEM* zc-iot-bridge-oem-s Wireless bridge for OEM with nano+ sensor*...
  • Page 2 1 (PB) 1 (PB) 0x81 1 (PB) 1 (PB) Instance 0 Instance 1 Instance 2 Instance 3 zc-iot-bridge 0x82 1 (PB) 1 (CW) 1 (CCW) 1 (PB) 1 (CW) 1 (CCW) ECD Op. mode 0x83 1 (PB) 1 (CW) 1 (CCW)

This manual is also suitable for:

Zc-iot-bridge-oemZc-iot-bridge-oem-s