Advertisement
Quick Links
HEATER ATTACHMENT FOR 300 CFM BLOWER FAN
Heater Attachment for
300 CFM Blower Fan
1200 CFM BLOWER FAN
• 120 volts, 60 Hz
• Rated power: 2.0 amp
• Moves air up to: 1200 CFM
• For indoor or outdoor use
• 3 speed switch
(high, medium, low)
• Built-in overload protection
• (2 pcs) 11 amp built-in
grounded receptacles
• Housing material: impact
resistant ABS
• 8.5 ft cord length, SJTW
14AWG
• 4-position adjustment feet
INSTRUCTION MANUAL
1200 CFM BLOWER FAN
300 CFM BLOWER FAN
1200 CFM Blower Fan
300 CFM BLOWER FAN
• 120 volts, 60 Hz
• Rated power: 1.0 amp
• Moves air up to: 300 CFM
• For indoor or outdoor use
• 3 speed switch
(high, medium, low)
• Built-in overload protection
• (2 pcs) 11 amp built-in
grounded receptacles
• Housing material: impact
resistant ABS
• 8.5 ft cord length, SJTW
14AWG
• 4-position adjustment feet
300 CFM Blower Fan
HEATER ATTACHMENT
FOR 300 CFM BLOWER FAN
• 1320 watts, 120 volts
• 11 amps, 5000 BTU
• Converts blower into a heater
• Clips securely onto the front
of the blower and plugs into
one of the outlets on the side
of the blower
• 16 AWG SJT cord,
grounded plug
• For indoor use only
1
Advertisement
Related Manuals for MasterCool 20300-A
Summary of Contents for MasterCool 20300-A
- Page 1 INSTRUCTION MANUAL 1200 CFM BLOWER FAN 300 CFM BLOWER FAN HEATER ATTACHMENT FOR 300 CFM BLOWER FAN 1200 CFM Blower Fan 300 CFM Blower Fan Heater Attachment for 300 CFM Blower Fan HEATER ATTACHMENT 1200 CFM BLOWER FAN 300 CFM BLOWER FAN FOR 300 CFM BLOWER FAN •...
- Page 2 WARNING! BLOWER FAN: 1. Always look over the work area prior to use. Never use near or in water. Do not use in damp or wet work areas. 2. Never use near flammable liquids or areas. 3. Do not restrict the flow of air to or from the unit, as you may cause damage to the unit. 4.
- Page 3 9. Do not insert or allow foreign objects to enter any ventilation or exhaust openings as this may cause an electrical shock or fire, or damage the heater. 10. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may be blocked.
- Page 4 HEATER ATTACHMENT MAINTENANCE INSTRUCTIONS TO CLEAN: 1. Always unplug and disconnect the heater from blower before cleaning. 2. Use a soft cloth moistened with a mild soap solution for the case. 3. Use a soft brush to clean the screens. 4.
Need help?
Do you have a question about the 20300-A and is the answer not in the manual?
Questions and answers