Table of Contents Important Safeguards Product Overview Component Description Instructions for Use [A] Initial Setup [B] Steam Press Ironing Guide [C] Steam Burst Function Tips for Steam Pressing [A] Pressing Shirts and Blouses [B] Pressing Pants [C] Other Techniques Specifications Auto Shut-Off Cleaning and Maintenance Storage Guide...
Important Safeguards Warning: To reduce the risk of fire, electric shock, or injury, please follow these essential safety precautions when using this electrical appliance. Read All Instructions Before Using Your Steam Press. Do not leave the Steam Press unattended while it is plugged in or in use. This unit is not a toy.
Using unapproved accessories may result in injury or damage to the unit. During use, surfaces may become hot. To avoid injury, do not touch the pressing plate or any other hot surface. Do not place hands or arms between the pressing plate and ironing board while the unit is in operation.
Top cover Water Tank Control Interface Cord Storage Compartment Handle Locking Knob Pressing Plate Cover LCD Screen Ironing Board Spray Bottle Pressing Plate Pressing Cushion Pressing Machine Base Component Description...
Page 6
Use the handle (3) to safely lift and lower the pressing plate and to carry the unit. Press the handle (3) down to generate a strong steam injection. Fill the tank (8) with distilled water to ensure the unit functions properly. Ensure water is present in the tank for the steam burst function to operate correctly.
Instructions for Use Initial Setup Place the Steam Press on a flat surface or position it on the matching stand. Turn the screw lock counterclockwise to secure the steam press to the stand. Note: To adjust the height of the stand, remove the Steam Press from the stand. Gently press down the handle and turn the button to the unlock position.
Touch the corresponding function key for the material. Press the “Steam” key to adjust the steam power. The pressing indicator light will flash around the temperature display while the pressing plate is heating. Allow a few minutes for the heating time to reach the selected temperature. The real-time temperature will display on the screen.
Tips for Steam Pressing Pressing Shirts and Blouses Place the shoulder yoke on the ironing board first and press it. Position the sleeves on the ironing board with the fold parallel to the long seam and press. Place the cuffs at the end of the ironing board and press them. Position the bottom of the shirt behind the ironing board.
Specifications Rated Voltage 220-240V Rated Frequency 50/60Hz Rated Power 2200W Main Frame Aluminum Power Cord UK 3pin Plug Steam Output 120g/min Steam Duration 1 minute Water Tank Capacity 850ml Temperature Range 80-220°C Pressing Board Length 32” Stand Gross Weight 7.2kg Stand Net Weight Stand Dimension 39×16.5×99.5cm...
Cleaning and Maintenance Fill the tank with water following the procedure outlined on page 6 of this manual. Place the pressing cushion in the center of the ironing board. Position a clean towel over the pressing cushion and ironing board. Set the temperature control buttons to the highest setting (linen).
Products that you buy directly from our Porodo website or shop come with a 24-month warranty. When you buy Porodo products from any of our approved sellers, you only get a 12-month warranty. If you want to extend this warranty, go to our website at porodo.net/warranty...
Need help?
Do you have a question about the LIFESTYLE PD-LFST039-BK and is the answer not in the manual?
Questions and answers