Airbi POOL Manual

Wireless pool thermometer and hygrometer

Advertisement

Wireless pool thermometer and hygrometer POOL
BEFORE USE
Please read the following information very carefully.
This manual will help you familiarize yourself with the new device, all its functions, parts and advise you in
case of problems with the device.
By carefully reading and following the instructions contained in this manual, you will prevent damage or
destruction of the device.
We are not responsible for any damage to the device caused by failure to follow the instructions contained in this
manual.
Pay close attention to the safety instructions.
Keep the manual for future reference.
PACKAGE CONTENTS
Basic unit
Wireless floating pool sensor, wireless air temperature and humidity sensor
Instructions for use
PROPERTIES
Displaying the pool water temperature using a wireless floating sensor
Indoor/outdoor temperature and humidity display. Memory for maximum and minimum values.
Possibility of expansion to up to 3 wireless temperature and air humidity sensors (max. distance up to 100 m in
open space).
Radio controlled time, alarm clock.
Indication of low batteries in the base/ transmitter .
Display backlight.
SAFETY INSTRUCTIONS
The device should only be used as described in the manual.
Any unauthorized repairs, modifications or other changes to the device are prohibited.
The device is not intended for medical purposes or public use, but exclusively for home use.
Keep the device and batteries out of the reach of children.
Do not throw batteries into fire, disassemble or recharge them.
Batteries contain harmful acids and can be dangerous if swallowed. Swallowing the battery can cause severe
internal burns and death within 2 hours. If you suspect that the battery may have been swallowed or otherwise
entered the body, seek medical attention immediately.
Replace weak batteries immediately to avoid damage to the device due to battery leakage. If your battery leaks,
use protective gloves and goggles when handling it.
Do not expose the device to extreme temperatures, vibrations or shocks. Protect from high humidity!
The wireless air temperature and humidity sensor is waterproof, but not waterproof.
We do not recommend using the floating pool sensor if it is freezing. It may be damaged or destroyed!
DEVICE DESCRIPTION:
Page 1/ 6
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the POOL and is the answer not in the manual?

Questions and answers

Summary of Contents for Airbi POOL

  • Page 1 Do not expose the device to extreme temperatures, vibrations or shocks. Protect from high humidity!  The wireless air temperature and humidity sensor is waterproof, but not waterproof.  We do not recommend using the floating pool sensor if it is freezing. It may be damaged or destroyed!  DEVICE DESCRIPTION: Page 1/ 6...
  • Page 2 Insert 2 new 1.5V AAA batteries with correct polarity into the battery compartment of each transmitter.  Close the battery compartment and carefully screw in the pool float sensor.  Open the battery compartment of the base and insert 2 new 1.5V AAA batteries with the correct polarity.
  • Page 3 You can also activate the reception of wireless sensors manually: use the CH/ ▲ button to select the desired channel 1, 2, 3. Then press and hold the CH/ ▲ button again . The last pairing on the channel of the pool sensor and on the selected channel 1, 2, 3 will be canceled and the basic unit will start searching again for a signal from the pool sensor and the external sensor transmitting on the selected channel 1, 2, 3.
  • Page 4  If signal reception is not turned off, the unit attempts to receive a DCF signal every night at 1:00 AM, 2:00 AM, and 3:00 AM. If reception fails, the indoor unit will try to receive the signal again at 4:00 and 5:00. The time set on the indoor unit is decisive for starting an attempt to automatically catch the DCF signal.
  • Page 5: Care And Maintenance

    By pressing the MEM/ ▼ to display the minimum measured values since the last reset.  The minimum and maximum values are displayed for the floating pool sensor, the internal values from the built- in sensors and the currently selected channel of the wireless temperature and humidity sensor.
  • Page 6: Specifications

    Manufacturer: Bibetus, s.r.o., Loosova 1, Brno 638 00, Czech Republic Hereby, Bibetus s.r.o. declares that the radio equipment typ Airbi POOL (model YJ5085) is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the internet address: www.airbi.eu No part of this manual may be published without the written consent of the manufacturer.

Table of Contents