Oricom BR610BK Manual

Important Information
Repair Notice
Please be aware that the repair of your goods may result in the loss of any user-generated data (such
as stored telephone numbers, text messages and contact information). Please ensure that you have
made a copy of any data saved on your goods before sending for repair.
Please also be aware that goods presented for repair may be replaced by refurbished goods or parts of
the same type rather than being repaired.
Contact Details for Oricom Support and Warranty claims in Australia
Oricom International Pty Ltd
Unit 1, 4 Sovereign Place
South Windsor, NSW 2756
Australia
Email: support@oricom.com.au
Phone: (02) 4574 8888
(Monday to Friday 8am to 6pm AEST)
Web: www.oricom.com.au
Contact details for Oricom Support and Warranty Claims in New Zealand
Email: support@oricom.co.nz
Phone: 0800 674 266
(Monday to Friday 10am to 8pm NZST)
Web: www.oricom.co.nz
ORICOM UHF CB ANTENNA BRACKET - BR610BK 20240531
OR023332 - BR610BK User Guide_05-31-24.indd 1
ORICOM UHF CB ANTENNA BRACKETS
BR610BK
Folding Antenna Mounting Bracket
FITTING INSTRUCTIONS
Fit folding bracket to mounting tab or antenna bracket using the hardware provided.
Mount the antenna to the folding bracket as shown in the diagrams. Make sure the cable is positioned
behind the pivot pin using the tool provided to hold the nut on the antenna in place.
Tighten the antenna on to the bracket. Note be careful not to twist the cable, it is best to tighten the
nut by hand as far as possible and then use the tool provided at the final stages of tightening the
assembly.
NOTE: For added security we suggest the use of a thread adhesive applied to the thread section of the
antenna before tightening the nut.
Rotate
antenna to
tighten
Pack includes a specialised tool
to assist with installation.
Leave tool in
position until
assembly is
tightened and
then remove tool
ORICOM UHF CB ANTENNA BRACKET - BR610BK 20240531
2024/5/31 16:04:55