Summary of Contents for Sharper Image Bright As Day! S1412
Page 1
“Bright As Day!” ™ Daylight Spectrum Lamp with Continuous Dimmer SI412 Instructions Read and save these instructions.
Page 2
We offer generous return privileges and excellent warranties on all our products. For more than 25 years, The Sharper Image has shared the fun of discovering innovative products that make life better and more enjoy- able.
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should always be followed. READ ALL INSTRUCTIONS BEFORE USING. Lighted lamp is HOT. WARNING - To reduce the risk of FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE UV, RADIATION or INJURY TO PERSONS: 1.
IMPORTANT SAFETY INSTRUCTIONS 7. Use only with a 27-watt or smaller lamp. 8. Do not operate the lamp with a missing or damaged guard, lamp containment-barrier or UV filter. SAVE THESE INSTRUCTIONS Polarization Instructions This lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock.
Precautions 1. Do not use with power supply voltage other than 120V AC. 2. Do not use outdoors or in locations with high humidity, such as bathrooms. 3. Do not install above sources of high heat, such as a stove or heater.
Assembly 1. Remove the plastic packing materials from the light fixture. 2. Remove the foam shipping guard from behind the pre- installed lamp. Note: The lamp socket pivots out. Be certain to push the lamp and socket back into the fixture. (See Figure A below.) Figure A 3.
Operation 1. Plug the lamp into a 110-120V power outlet. 2. Turn the power control knob slightly clockwise to the maximum brightness setting. 3. To reduce the brightness, turn the power control knob clockwise. Note: Dimming feature works best after the lamp has warmed up for about one minute.
(See Figure B below.) Figure B 2. Replace with a new lamp. Replacement lamps are available from The Sharper Image (Item No. SI928). Do not use any other lamp with this product.
Page 11
Lamp Replacement 3. Gently push the lamp and socket back into place. (See Figure C below.) Figure C...
Statement of FCC Compliance WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B ISM equipment, pursuant to Part 18 of the FCC Rules.
Page 13
Statement of FCC Compliance •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. NOTE: This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equip- ment operating between 0.45-30 MHz.
The Sharper Image will repair any defects in materials or workmanship. In the event repair is not possible, The Sharper Image will either replace this product with one of similar features and price, or refund the full purchase price of the product, whichever you prefer.
Need help?
Do you have a question about the Bright As Day! S1412 and is the answer not in the manual?
Questions and answers