LZF Cosmos COS PG E26 UL Setup

CARE INSTRUCTIONS
Use and care of your lamp.
You have just purchased an original handmade product by LZF. Your lamp is made out FSC®
certified natural wood with our patented veneer finish Timberlite®. This treatment both
protects and safeguards the wood veneer against breakages.
Depending on the type of lamp use a feather duster, soft cleaning cloth or damp cloth for
cleaning. On our more delicate shades, like those made from wood strips, a feather duster or
an air blower is preferable. In our more solid shades a damp cloth may be used. Clean only
the flat surface of the veneer with the cloth, and please avoid any moisture contact along the
edge of the veneer.
Bulbs
We recommend using energy-saving light bulbs, like the CFL or LED bulbs. Please refer to the
instruction manual or visit our website www.lzf-lamps.com to make sure you are using the
right type of bulb.
You can buy bulbs directly from our company; check our catalogues for availability.
Precautions
Avoid direct sunlight, strong indirect sunlight and moisture on the lamp. Unplug the lamp
before cleaning or changing the light bulb. Servicing of the electrical installation should only
be performed by qualified electrical personnel by LZF.
w w w. l z f - l a m p s.c o m
contacts@lzf-lamps.com
© Luziferlamps, S.L. Valencia, Spain. 2014. All rights reserved.
REV. 10-2014
Cosmos
SET UP
USA & CANADA
COS PG E26 UL
COS PG GU24 UL