Connections; Connecting The Camera To The Pc - JVC GZ-MG57AA Instructions Manual

NOTES:
If PowerDirector/PowerProducer/PowerDVD have
already been installed on the PC, uninstall them
before installing the provided software.
Video files captured with this camera can only be
handled on the provided software. Please install
and use the provided software (PowerDirector
Express NE, PowerProducer 3 NE, PowerDVD 5
NE).
If you perform installation of a software that is
already installed, uninstallation will start. In this
case, perform the installation again after
uninstallation is finished.
Windows Messenger has to been closed during
CyberLink DVD Solution installation. If it is running
during installation, [Information] screen appears.
To close Windows Messenger:
1) While holding [Ctrl + Alt] key, press [Delete]
key so that [Task Manager] appears.
2) Click [Processes] tab and select
[msmsgs.exe].
3) Click [End process].
4) Select [Yes].

Connections

Connecting the Camera to the PC

Connect the camera to the PC to copy still
images and video files in a recording medium.
To AC outlet
AC adapter
To DC connector
Camera
1
To assure safety, make sure all units are
turned off before making any connections.
2
Connect the AC adapter to the camera,
then plug the AC adapter into an AC outlet.
If necessary, plug the AC adapter into an AC
outlet with the provided power cord.
3
Turn on the camera.
4
Connect the camera to the PC with the
USB cable.
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
When the USB cable is connected, turning on or off
the camera causes malfunctions of the PC.
Connect the camera directly to the PC, not through
the hub.
Do not use an extension USB cable.
– 13 –
To USB connector
USB cable
To USB connector
CONTINUED ON NEXT PAGE
PC