Disconnecting The Usb Cable - JVC GZ-MG26EK Instructions Manual

Disconnecting the USB cable

Before loading or unloading recording mediums
or turning off the PC, first disconnect the USB
cable and turn off the camera.
1
Confirm that the ACCESS lamp on the
camera does not light or blink.
If the ACCESS lamp lights or blinks, wait until it is
turned off before proceeding.
2
Double-click the [Safely Remove Hardware]
or [Unplug or Eject Hardware] icon in the
status bar.
The [Safely Remove Hardware] or [Unplug or
Eject Hardware] dialog box appears.
®
Windows XP: If not, wait a while then go to
step 5.
3
Select [USB Mass Storage Device] or [USB
Disk], and then click [Stop].
4
Click [OK].
®
Windows 2000: If a message indicating that the
device can be safely removed appears, click [OK]
and then click [Close].
* The model name depends on the connected
camera.
5
Disconnect the USB cable.
6
Set the camera's power switch to off.
The camera turns off.
– 14 –