Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for EWS EMT
- Page 1 Quick-Start EMT Device.
- Page 2 Your EWS EMT Device Your EWS EMT (Environmental Monitoring Telemetry) Device is an ultra powerful, yet low power draw and compact multi-communication enabled IoT Device designed specifically for remote environmental monitoring applications. The EWS EMT Device is a self-contained datalogger and cellular or Iridium Satellite transmitter which includes a uniquely designed optional clip-on solar panel (3W and 6W options) to monitor a wide range of remote environmental and geotechnical applications.
- Page 3 Iridium transmission type can be visually identified by the presence of a sticker indicating Iridium with the Device IMEI number on the side of the EMT opposite the push button. EMT Devices that are 4G LTE transmission type have a sticker indicating Cellular with the Device IMEI number on the side.
- Page 4 Wiring and Sensor inputs. The EWS EMT Device has four sensor input plugs labelled S1 - S4 and one power input plug . S1 and S2 inputs differ in sensor protocol options than S3 and S4 inputs. The wiring also differs and are differentiated as indicated below in the pinout tables.
-
Page 5: Getting Started
Device LED’s should be blinking delivered in Transportation Mode to Blue and Green indicating it is ready conserve battery life until installation. to be paired with EWS Lynx mobile To wake up your Device, simply press configuration App. button once. - Page 6 EWS Lynx Mobile App. The EWS Lynx App is the freely available on both IOS and Android App stores. The App is an easy on-site tool for configuring your Device and checking for successful sensor connection. Ensure mobile phone Bluetooth is on and Device Bluetooth is active, open the App and your Device will connect automatically.
- Page 7 Basic Configuration and Sensor Check. It is important to note that EWS Devices generally come pre-configured out of the box for plug and play pairing with sensors as requested on purchase - so minimal programming should be required. Check with EWS or EWS distribution partner first before altering programming.
- Page 8 Sensor Check and Measurement Interval. To check sensors are connected and reading correctly: Press Read All Channels Navigate to Sensors tab. Check readings are button. Device will cycle as expected. through all configured channels. To change channel configuration or measurement interval – navigate into each channel and change as required.
- Page 9 Powering your EWS EMT Device. If you have received your EWS EMT Device with no batteries included, you can source the Device specific batteries at your local battery specialist store. Simply remove the Device lid and insert batteries ensuring they are installed in correct orientation.
- Page 10 Contact us EWS Monitoring. Australia: Perth I Sydney Americas Sales enquires: sales@ewsaustralia.com Support enquires: support@ewsaustralia.com Other: info@ewsaustralia.com www.ewsmonitoring.com...
Need help?
Do you have a question about the EMT and is the answer not in the manual?
Questions and answers