4.4.2 Dangers due to electricity ..........................12 4.4.3 Dangers due to induction..........................13 4.4.4 Dangers due to fire risk ........................... 13 4.4.5 Dangers due to hot surfaces, burns and explosion..................13 4.4.6 Avoid material damage during transport......................13 Rieber GmbH & Co KG 03/2010...
Page 3
8.10 Dry the appliance to keep it ready for its next use ....................23 9. Fault - What now? ............................... 23 10. Warranty and liability..............................24 11. Information about applicable standards, laws, directives..................24 03/2010 Rieber GmbH & Co KG...
The product data is indicated on the type plate (underneath the appliance). For detailed information on dimensions, order number, accessories: Please refer to the catalogue If you have any questions, please contact your local Rieber Service. 03/2010 Rieber GmbH & Co KG...
® For holding various varithek functional elements. • Rails on the inside offer a choice of installation heights. The position depends on the depth of the Gastronorm • containers used. Rieber GmbH & Co KG 03/2010...
The position depends on the depth of the Gastronorm containers used. • ® 2.5.3 varithek wok attachment and wok ® For use with the varithek induction hob. • The wok fits into the round cut-out which holds it in place. • 03/2010 Rieber GmbH & Co KG...
Pay particular attention to the safety requirements if you are not using the appliance • in a table-top or built-in system module. Never heat anything other than food. • Do not use to heat up or humidify a room. • Rieber GmbH & Co KG 03/2010...
During all phases of the product's life please ensure that the product is safely • integrated into its environment. Do not make any conversions or modifications to the product. • 03/2010 Rieber GmbH & Co KG...
Using electrical appliances for other uses than that intended can lead to hazardous situations. Service Only have the device repaired by qualified and authorised staff. Only use • original spare parts. In this way you can ensure that the appliance remains safe. Rieber GmbH & Co KG 03/2010...
Risk of burns or scalding Wear protective gloves Risk of fire Warning: non-ionising, electromagnetic radiation NOTE indicates potential damage to property without any personal injury. Failure to follow these instructions may cause damage to property. 03/2010 Rieber GmbH & Co KG...
DANGER! Danger of electric shock. Risk of death. Before each use, inspect the product, the connecting plug and electric cable for • any visible signs of damage. Rieber GmbH & Co KG 03/2010...
Keep unauthorised persons away from the product. • Never operate the product unsupervised. • 4.4.6 Avoid material damage during transport NOTE Improper transport may damage the appliance. Disconnect the electrical connection cable. • Remove accessories and transport them separately. • 03/2010 Rieber GmbH & Co KG...
Clean the appliance thoroughly before using for the first time. • Clean with a damp cloth and rub dry with a clean cloth. Rinse the accessories. Please refer to "Cleaning and maintenance" on Page 21ff Rieber GmbH & Co KG 03/2010...
Electrical hazard! For your own safety, electrical work may only be carried out by the manufacturer, its • customer service or a qualified electrician. Danger of electric shock! Risk of death! When instructing personnel, expressly point out that the units • may be damaged if the neutral conductor is interrupted. 03/2010 Rieber GmbH & Co KG...
User tip: Significant energy loss if the system module flap is open. Remember to close the system module flap. The hot air is able to heat up the sides of the GN container evenly. Rieber GmbH & Co KG 03/2010...
To switch it off: Turn the knob anticlockwise to a lower setting. Note! Make sure the lower system module flap is closed otherwise the appliance could slide out. Keep the upper part of the flap open otherwise the appliance could overheat. 03/2010 Rieber GmbH & Co KG...
Switch the appliance off at the main switch after use. Note! Make sure the lower system module flap is closed otherwise the appliance could slide out. Keep the upper part of the flap open otherwise the appliance could overheat. Rieber GmbH & Co KG 03/2010...
Set the required power level using the temperature controller. Turning the dial to the right – more power, to the left – less power. Only use non-scratch utensils. Switch the appliance off at the main switch after use. 03/2010 Rieber GmbH & Co KG...
Materials such as plastic, aluminium foil or sugar can cause scratches or crevices in the Ceran cooktop when it is hot. Scrape remnants off with a glass scraper while the cooktop is still hot. • 7.2 Accessories and their use Ensure the accessories are operational. Rieber GmbH & Co KG 03/2010...
Be careful not to scratch the surface with sharp-edged objects. Do not use any abrasive or • aggressive cleaning agents, e.g. oven sprays or a sponge with an abrasive side. Do not use any cleaning agents containing sand, sodium, acid or chloride or solvents. • 03/2010 Rieber GmbH & Co KG...
Clean the appliance with a mild detergent diluted in hot water. After cleaning, rub surfaces • dry with a soft cloth. User tip We recommend Rieber cleaning agent for stainless steel for cleaning stainless steel. • It is an especially tough yet gentle cleaner, produces a dazzling shine, cleans and protects •...
# User Fan faulty or dirty Repair # Rieber Service Grease filter is dirty Remove filter and clean using a dishwasher, allow to dry. Ceramic cuvette is damaged, Repair scratched # Rieber Service 03/2010 Rieber GmbH & Co KG...
• non-original spare parts were used. • The "Sales and delivery terms and conditions" of Rieber GmbH & Co. KG shall apply for all warranty claims made against the manufacturer. 11. Information about applicable standards, laws, directives EC Directive:...
Need help?
Do you have a question about the varithek V-1/1-ck-2800-QB and is the answer not in the manual?
Questions and answers