SAFETY PRECAUTION IMPORTANT : PLEASE READ BEFORE USING THE APPLIANCES 1. Unplug the power cord during installation, cleaning or relocation of appliances. 2. Do not modify the length of the power cord. 3. Do not use the appliances if the power cord or the plug is damaged, or the power socket is loose.
INSTALLATION INSTRUCTION Desktop Installation Note: Water Tray must be installed together with Desktop Stand to ensure normal operation. STEP 1 1. Put Water Tray on top of Desktop Stand as per figure shown. Ensure convex point at back side of Water Tray is facing downwards. 2.
Page 4
INSTALLATION INSTRUCTION Wall Mount Installation IMPORTANT Hand Dryer SHOULD NOT install inside zone 0, 1 and 2. Ensure instllation distance meet the requirement as per figure below. Min. 0.6m Zone 1 Min. 1.0m Zone 0 STEP 1 1. Drill two holes on the wall with diameter of 5mm and depth of 35mm. The distance between two holes is 53.4mm.
INSTALLATION INSTRUCTION STEP 2 1. Attach the Hand Dryer to the Wall Bracket, allign mounting hole on Hand Dryer body with Wall Bracket. 2. Push down until Hand Dryer is fix on Wall Bracket. FUNCTION AND FEATURES 1. Turn on power at mains supply, press On/Off button located at bottom of Hand Dryer as per figure below.
MAINTENANCE IMPORTANT : BEFORE PERFORMING ANY MAINTENANCE WORK, UNPLUG THE HAND DRYER FROM THE SUPPLY SOCKET. 1. For body surface cleaning, use a wet cloth (or add a little detergent) to wipe. Do not use petrol, asphalt, diluent corrosive detergent or solvent for cleaning, it is strictly prohibited water rinse wash.
CUSTOMER SERVICE CENTRE If you need any technical assistance or faulty report, please contact our customer service centre at : Malaysia Alpha Home Appliances Sdn. Bhd. (390258-H) Head Office : 6, Jalan Sungai Kayu 32/37, Berjaya Park, Sect 32,40460 Shah Alam, Selangor. : 03-5740 6666 Fax : 03-5740 8220 Website...
Need help?
Do you have a question about the HD/1S and is the answer not in the manual?
Questions and answers