Hasbro G.I.JOE A COBRA COMMAND WEAPON! COBRA MAMBA 6026 Instructions

IG'IMOE
A COBRA COMMAND WEAPON!
I
COBRA MAMBA^" INSTRUCTIONS Remove all pieces
from plastic frames.
If you have difficulty,
use safety scissors.
Align front post on upper pod with front hole in lower pod. Fit rear of pod halves together. Snap canopy bar into notches in pod and snap closed. Repeat with second
pod and canopy. (ILL. 1)
Insert rear of gun into hole underneath pod and press front down to snap gun into place. Repeat with other gun and pod. (ILL. 2)
Turn Mamba upside down. With pod upside down, slide exhaust over mount and snap pod down. Repeat with second pod. Push bomb lever and place bomb between
clamps. Release lever to lock bomb. (ILL. 3)
Snap post on small bomb lever into notches, making sure shorter end faces front. Lightly fit slot in bomb over tab. Repeat with second lever and bomb. Push tabs
Twn to release bombs. (NOTE: BOMBS WILL NOT DISENGAGE WHEN PRESSED COMPLETELY OVER TABS. (ILL. 4) '^n to release bombs. (NOTE: BOMBS WILL NOT DISENGAGE WHEN PRESSED COMPLETELY OVER TABS. (ILL. 4)
^..^n Mamba right side up. Insert one post on main canopy into hole in cockpit and snap other post into place. Snap canopy closed. Fit tabs on engine cover into
,slots in engine. (ILL. 5)
6
Slide rear of exhaust into slot behind engine and snap down. With fins curving inward, snap fin tabs into holes in rear of Mamba. (ILL. 6)
7 Line up notches in rotor blade holes with notches in engine rotors. Press blades firmly onto engine rotors. Spin rotor knob underneath Mamba to turn rotors. (ILL. 7)
8
Fit slots in 4 missiles over tabs on each side of Mamba. Fit tabs on 4 mini-missiles into slots on sides of pods. Open canopy, bend Gyro-Viper's knees and place him
on his back in cockpit. (ILL. 8) (Includes Gyro-Viper figure.)
9
To detach pods from Mamba, pull fronts of pods downward and watch them do Gyro-Viper's dirty work!
SEE BLUEPRINTS ON BACK TO APPLY OFFICIAL BATTLE INSIGNIAS!
eig87 Hasbro, Inc., Pawtucket, Rl 02862 USA. All Rights Reserved. 6026 PN 184183.00C