Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Instant Span 300
Summary of Contents for Instant Span 300
- Page 1 Span Assembly Guide ACCESS TOWER SYSTEM QUALITY & STRENGTH YOU CAN TRUST...
-
Page 2: Assembly Guide
3T (Through the Trap) Safety Standard. Before assembly please read the safety notes carefully. Span 300 is a mobile access tower system complying with EN 1004 and WAHR, anti slip frame access, designed for Class 3 loading. ASSEMBLY PROCESS Safe Working Loads . - Page 3 4. BUILD PROCESS (Pictures show method for building a 6m tower) Insert castors and adjustable Attach diagonal braces in Fit guardrails (horizontal Continue diagonal bracing in a Fit trapdoor platform to legs into the 7 rung frames. Clip opposing directions from the 1 braces) to the 7 rung either zig-zag pattern by attaching 2...
- Page 4 SINGLE WIDTH TOWER While the general build process for the single width tower is the same as the double width, the single width tower uses only 2 diagonal braces per 2m section, rather than 4. See attached figure for bracing details. The build method is as follows.
-
Page 5: Assembly Components
Single Width Assembly Components Double Width 1. Adjustable Leg & Castor 2. Adjustable Leg 3. Horizontal Brace 4. Diagonal Brace 5. 5 Rung Ladder Frame 6. 5 Rung Frame 7. Stabiliser 8. Trapdoor Platform 9. 3 Rung Ladder Frame 10. 3 Rung Frame 11. -
Page 6: General Guidance
If the wind is expected to reach Force 8, the tower should be dismantled Manual is in accordance with EN1298 Span 300 EN1004 / WAHR Rev1 02/09 Unit S1, Friel Avenue, Park West Industrial Park, Nangor Road, Dublin 12, Ireland...
Need help?
Do you have a question about the Span 300 and is the answer not in the manual?
Questions and answers