nRSP-ST Networked 1kHz - 2GHz SDR receiver
Operating Instructions
Thank you for choosing the nRSP-ST all-in-one, plug-and-play networked receiver. This
Software Defined Radio (SDR) receiver is designed to be connected to a computer network
via either the ethernet port or a Wi-Fi connection. Access to, and operation of the radio is by
TM
use of multi-platform SDRconnect
client software provided and supported by SDRplay Ltd.
Included with this nRSP-ST unit is an AC mains power supply and Wi-Fi antenna.
Please read this booklet carefully before using this product. Follow all instructions and
warnings provided in this booklet and the relevant website links. Do not use this product in any
way that is not specified in this booklet or in the relevant website links. Do not modify or
tamper with this product or its components. Doing so may void your warranty and affect your
product's performance, safety, and compliance.
For the End User License Agreement and Warranty Statement,
go to www.sdrplay.com/terms
For the latest Product Information
go to www.sdrplay.com/nRSPst
For additional information and Help, additional links to Documentation, Video guides and
Support can be found at www.sdrplay.com/help
SDRplay Ltd
PO Box 1180, Princes Risborough, HP22 9TD, UK
& The Black Church, St Mary's Place, Co. Dublin, D07 P4AX, Ireland, EU
www.SDRplay.com
©2024 SDRplay. All rights reserved. SDRplay and RSP product names are trademarks of
SDRplay, registered in many jurisdictions world-wide
Need help?
Do you have a question about the nRSP-ST and is the answer not in the manual?
Questions and answers
Can you please give me the specifics on how to connect a nRSP-ST to my wifi network. THANKS!!!
To connect the SDRPLAY nRSP-ST to your Wi-Fi network:
1. Power the Device – Ensure the nRSP-ST is connected to an AC mains power supply.
2. Attach the Wi-Fi Antenna – Connect the included Wi-Fi antenna to enable wireless connectivity.
3. Network Connection – The nRSP-ST can connect to your network via Wi-Fi. Ensure your router detects the device.
4. Install SDRconnect Software – Download and install the SDRconnect client software on a computer connected to the same network.
5. Device Detection – The software should automatically search for and detect the nRSP-ST on your network.
6. Troubleshooting – If the device is not detected, restart the setup process, including your Wi-Fi connection, if needed.
This setup allows the SDRPLAY nRSP-ST to function wirelessly with your computer for software-defined radio operations.
This answer is automatically generated